CRAMFS: Error -3 while decompressing!
Wolfgang Denk
wd at denx.de
Tue May 23 06:58:58 EST 2006
In message <44718702.1070809 at fagorautomation.es> you wrote:
>
> We have a mpc5200liteB evaluation board with u-boot 1.1.4 and linux
> 2.4.25 from Denx. We have grabed a cramfs root fs on a mtd partition
> and we are able to boot linux without problems:
...
> However, we are not able to boot linux with the same rootfs image (with
> the u-boot header) loaded from RAM.
>
> setenv bootargs root=/dev/rw rw console=ttyS0 console=ttyS0
> init=/sbin/init ip=on
What's /dev/rw ???
> and CRAMFS image is built with correct endianess:
Ummm.. Why would you want to use a cramfs file system in a ramdisk
image? This iseems to be a truely pessimal combination of features to
me. Please see
http://www.denx.de/wiki/view/DULG/RootFileSystemDesignAndBuilding for
some hints...
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Life sucks, but it's better than the alternative."
- Peter da Silva
More information about the Linuxppc-embedded
mailing list