JFFS2 FS is read-only (not what I want)

[Anantharaman Chetan-W16155]

Also as a side note, I think even if you unlock your banks/sectors in
U-Boot, when the Linux kernel is launched I am not sure if the
sectors/banks remain unlocked. You can also use the MTD Utils to unlock
the device, erase the device, etc. in the shell.

 

Chetan

 

________________________________

From: Ben Warren [mailto:bwarren at qstreams.com] 
Sent: Monday, July 03, 2006 9:36 AM
To: Anantharaman Chetan-W16155
Cc: linuxppc-embedded at ozlabs.org
Subject: RE: JFFS2 FS is read-only (not what I want)

 

Chetan,

On Mon, 2006-07-03 at 10:18 -0400, Anantharaman Chetan-W16155 wrote: 

 
Did you check to see if your flash banks are unlocked?
 

According to U-Boot, only the first four sectors are locked.  My JFFS2
partition is in sectors 37-52 (1-based).  I'll definitely look more
deeply into this, though.

thanks,
Ben 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20060703/ee6cdc5e/attachment.htm