PQ2FADS_ZU: u-boot-1.1.4, eldk.3.1.1, linux-2.4.25 boots problem

[Heiko Schocher]

Hello,

I think your Environmentsettings are bogus:

your Environmentsettings:
> setconsole=setenv bootargs $console
[...]
> nfsboot=tftp $loadaddr $bootfile; run setconsole nfsargs addip; echo $bootargs; bootm
> console=console=ttyS0,115200n8 console=tty0

try this Environmentsettings:

addcons=setenv bootargs $(bootargs) console=ttyS0,115200
nfsboot=tftp $loadaddr $bootfile; run nfsargs addip addcons; echo $bootargs; bootm

> I have tried console=ttyCPM0,115200n8 console=tty0 and it makes no difference.

try console=ttyS0,115200

> BTW, which one should be used for serial console in 2.4.x kernel
> for this PowerQUICC II 8280 platform? ttySx or ttyCPMx?

If you have a 2.4.x Kernel, you must use ttySx, on a 2.6.x Kernel
it is ttyCPMx

Is there anything in the log_buf? Try a

http://www.denx.de/wiki/view/DULG/LinuxPostMortemAnalysis

Best regards

Heiko