how to cross-compile netperf.

[Ming Liu]

Dear Wolfgang,
Yes! It helps.

Thanks so much for your kindly help.

BR
Ming


>From: Wolfgang Grandegger <wg at grandegger.com>
>To: Ming Liu <eemingliu at hotmail.com>
>CC: linuxppc-embedded at ozlabs.org
>Subject: Re: how to cross-compile netperf.
>Date: Mon, 11 Dec 2006 12:24:45 +0100
>
>Ming Liu wrote:
> > Dear all,
> > Maybe my question is not proper for this maillist but I really see some
> > friends who are using netperf to measure the netowrk performance from
> > this maillist. So I ask for help here.
> > Could anyone please tell me how to cross-compile the Netperf which 
could
> > be run on my PowerPC 405 processor? I cannot find a detailed 
explanation
> > from the manual. After the downloading and untaring the package, I use
> > the command "./configure --host ppc CC=powerpc-405-linux-gnu-gcc".
> > However unfortunately it doesn't work and error " checking whether
> > setpgrp takes no argument... configure:error: cannot check setpgrp when
> > cross compiling" appears. My host system is X86_64 PC with linux OS and
> > my target system is PowerPC 405(Xilinx Virtex 4 FPGA) with linux
> > too(embedded Ml403 board from Xilinx company). In my condition, which
> > arguments shall I specify?
> > If anyone can help, I wll really appreciate a lot.
>
>$ echo "ac_cv_func_setpgrp_void=yes" > config.cache
>$ ./configure --host ppc CC=powerpc-405-linux-gnu-gcc --config-cache
>
>Wolfgang.

_________________________________________________________________
免费下载 MSN Explorer:   http://explorer.msn.com/lccn/