DS1302 driver for powerpc

[Chun Chung Lo]

Hi,

That's good. I also started to work on it.

Thanks for your quick reply.

Best regards,
Lo Chun Chung

-----Original Message-----
From: Matt Porter [mailto:mporter at embeddedalley.com]
Sent: Thursday, 31 August, 2006 9:12 AM
To: Chun Chung Lo
Cc: linuxppc-embedded at ozlabs.org
Subject: Re: DS1302 driver for powerpc


On Thu, Aug 31, 2006 at 08:51:22AM +0800, Chun Chung Lo wrote:
>
> Hi,
>
> Thanks for your help.
>
> But I also do not have this driver for 83xx. (as my linux is comes
> from
> Montavista)

The 83xx reference was a hypothetical. There is no 83xx driver for the
ds1302.

> Could you mind providing me a link / or a source of such driver for me

> to reference ?

My advice is to port the cris DS1302 driver to your board-specific GPIO
configuration.

-Matt


This message (including any attachments) is for the named addressee(s)'s use only. It may contain
sensitive, confidential, private proprietary or legally privileged information intended for a
specific individual and purpose, and is protected by law. If you are not the intended recipient,
please immediately delete it and all copies of it from your system, destroy any hard copies of it
and notify the sender. Any use, disclosure, copying, or distribution of this message and/or any
attachments is strictly prohibited.