ELDK 3.1.1 support for x86_64 host architecture

[Michael Carey]

I found the subject "ELDK 3.1.1 support for x86_64 host architecture" in the archives (Apr 15 2005) which describes my problem, however there was never any posting of a resolution.

When I attempt to run: "./install -d /opt/eldk" I get the following output:

Do you really want to install into /opt/eldk directory[y/n]?: y

Creating directories
Done
Installing cross RPMs

Preparing...                ########################################### [100%]
        package rpm-4.1.1-1.8xa_10 is intended for a i386 architecture
can't change dir: No such file or directory

The details on my system are:

mcarey at mmtdev:~> cat /etc/issue

Welcome to SUSE LINUX 10.1 (X86-64) - Kernel \r (\l).

mcarey at mmtdev:~> uname -a
Linux mmtdev 2.6.16.13-4-default #1 Wed May 3 04:53:23 UTC 2006 x86_64 x86_64 x86_64 GNU/Linux
mcarey at mmtdev:~> cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 15
model           : 4
model name      :               Intel(R) Pentium(R) 4 CPU 3.06GHz
stepping        : 1
cpu MHz         : 3065.612
cache size      : 1024 KB
fpu             : yes
fpu_exception   : yes
cpuid level     : 5
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl tm2 cid cx16 xtpr
bogomips        : 6140.72
clflush size    : 64
cache_alignment : 128
address sizes   : 36 bits physical, 48 bits virtual
power management:

//
Thanks for any help you could provide,
Michael Carey