How to make mudules on linux-ppc2.6.12

[JohnsonCheng]

Dear Andy,

 

Thanks your reply. But I am sorry that it doesn't work on my box.

My kernel had been configured and compiled, and I also modify my Makefile as
following:

 

Obj-m := test.o

All:

  $(MAKE) ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.12.3
SUBDIRS=$(PWD) modules

 

The output message is the same as before, no error message and no test.ko
module.

 

 

Thanks,

Johnson Cheng

 

 

  _____  

From: JohnsonCheng [mailto:JohnsonCheng at qnap.com.tw] 
Sent: Thursday, October 20, 2005 6:57 PM
To: linux-ppc-embedded
Subject: How to make mudules on linux-ppc2.6.12

 

Dear All,

 

I just write a "hello world" module code, but I can't compile it for
ppc2.6.12.

My Makefile is list as following:

 

obj-m := test.o

all:

  make ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.12.3
SUBDIR=. modules

 

When I run make, no error message output, but I find no test.ko modules. The
output message is list as following:

 

make ARCH=ppc CROSS_COMPILE=powerpc-linux- -C /root/linux-2.6.1

2.3 SUBDIR=. modules

make[1]: Entering directory `/root/linux-2.6.12.3'

  CHK     include/linux/version.h

make[2]: `arch/ppc/kernel/asm-offsets.s' is up to date.

  Building modules, stage 2.

  MODPOST

make[1]: Leaving directory `/root/linux-2.6.12.3'

 

Do anyone can give me some help ?

 

Thanks,

Johnson Cheng

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051021/a01cc075/attachment.htm