Joystick and Lite5200

Tue Nov 29 02:27:29 EST 2005

Hi all,
I am trying use Logitech WingMan Strike Force 3D on Lite5200 board. I am
using linux-2.6.14 Denx's tree, just selecting this options:

CONFIG_INPUT=y
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
CONFIG_INPUT_EVBUG=y

and

CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_LOGITECH_FF=y

As my device ID is not listed in hid-ff.c and hid-lgff.c, then I mapped it:

drivers/usb/input/hid-ff.c :
{0x46d, 0xc285, hid_lgff_init}, // Logitech Wingman Strike Force 3d

drivers/usb/input/hid-lgff.c
{0x046d, 0xc285, ff_joystick},
(I need do it in the PC to force feedback work fine too)

But the problem is the driver is not working correctly, if I try open
/dev/input/event0 it return "No such device", but as you can see below
evbug.c show correctly all joystick events.

Suggestions?

Best regard,

Alan

/ # dmesg
...
usbmon: debugfs is not available
2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PPC SOC)
block sizes: ed 64 td 64
initializing PPC-SOC USB Controller
ppc-soc-ohci ppc-soc-ohci: USB Host Controller
ppc-soc-ohci ppc-soc-ohci: new USB bus registered, assigned bus number 1
ppc-soc-ohci ppc-soc-ohci: irq 44, io mem 0xf0001000
ppc-soc-ohci ppc-soc-ohci: resetting from state 'reset', control = 0x0
ppc-soc-ohci ppc-soc-ohci: OHCI controller state
ppc-soc-ohci ppc-soc-ohci: OHCI 1.0, NO legacy support registers
ppc-soc-ohci ppc-soc-ohci: control 0x083 HCFS=operational CBSR=3
ppc-soc-ohci ppc-soc-ohci: cmdstatus 0x00000 SOC=0
ppc-soc-ohci ppc-soc-ohci: intrstatus 0x00000044 RHSC SF
ppc-soc-ohci ppc-soc-ohci: intrenable 0x8000001a MIE UE RD WDH
ppc-soc-ohci ppc-soc-ohci: hcca frame #0005
ppc-soc-ohci ppc-soc-ohci: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
ppc-soc-ohci ppc-soc-ohci: roothub.b 00000000 PPCM=0000 DR=0000
ppc-soc-ohci ppc-soc-ohci: roothub.status 00008000 DRWE
ppc-soc-ohci ppc-soc-ohci: roothub.portstatus [0] 0x00000100 PPS
ppc-soc-ohci ppc-soc-ohci: roothub.portstatus [1] 0x00000100 PPS
ppc-soc-ohci ppc-soc-ohci: created debug files
usb usb1: default language 0x0409
usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: USB Host Controller
usb usb1: Manufacturer: Linux 2.6.14 ohci_hcd
usb usb1: SerialNumber: PPC-SOC USB
usb usb1: adding 1-0:1.0 (config #1, interface 0)
hub 1-0:1.0: usb_probe_interface
hub 1-0:1.0: usb_probe_interface - got id
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 1-0:1.0: standalone hub
hub 1-0:1.0: ganged power switching
hub 1-0:1.0: global over-current protection
hub 1-0:1.0: power on to power good time: 4ms
hub 1-0:1.0: local power source is good
hub 1-0:1.0: no over-current condition exists
hub 1-0:1.0: enabling power on all ports
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0000
Serial: MPC52xx PSC driver
ttyS0 at MMIO 0xf0002000 (irq = 39) is a MPC52xx PSC
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 64 RAM disks of 4096K size 1024 blocksize
eth0: Phy @ 0x0, type LXT971 (0x001378e2)
Generic platform RAM MTD, (c) 2004 Simtec Electronics
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 2, 16384 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (romfs filesystem) readonly.
Freeing unused kernel memory: 108k init
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
ppc-soc-ohci ppc-soc-ohci: GetStatus roothub.portstatus [0] = 0x00010301 CSC
LSDA PPS CCS
hub 1-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
ppc-soc-ohci ppc-soc-ohci: GetStatus roothub.portstatus [0] = 0x00100303
PRSC LSDA PPS PES CCS
usb 1-1: new low speed USB device using ppc-soc-ohci and address 2
ppc-soc-ohci ppc-soc-ohci: GetStatus roothub.portstatus [0] = 0x00100303
PRSC LSDA PPS PES CCS
usb 1-1: skipped 1 descriptor after interface
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=4, Product=32, SerialNumber=0
usb 1-1: Product: WingMan Strike Force 3D
usb 1-1: Manufacturer: Logitech Inc.
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usbhid 1-1:1.0: usb_probe_interface
usbhid 1-1:1.0: usb_probe_interface - got id
drivers/usb/input/hid-core.c: timeout initializing reports

Force feedback for Logitech force feedback devices by Johann Deneux <
johann.deneux at it.uu.se>
input: Logitech Inc. WingMan Strike Force 3D//class/input as input0
evbug.c: Connected device: "Logitech Inc. WingMan Strike Force 3D",
usb-PPC-SOC USB-1/input0
input<7>evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 0,
Value: 620
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 1, Value: 536
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 5, Value: 140
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 6, Value: 126
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 0, Code: 0, Value: 0
: USB HID v1.00 Joystick [Logitech Inc. WingMan Strike Force 3D] on
usb-PPC-SOC USB-1
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 0, Value: 619
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 5, Value: 141
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 0, Value: 618
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 0, Value: 624
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 0, Code: 0, Value: 0
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 3, Code: 0, Value: 618
evbug.c: Event. Dev: usb-PPC-SOC USB-1/input0, Type: 0, Code: 0, Value: 0
/ # cat /dev/input/event2
cat: /dev/input/event2: No such device
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20051128/7b2ef189/attachment.htm 