Help ! 2.6.14 kernel can't bring up

[zjznliang]

Hi linuxppc-embedded！

	         I  have downloaded the Linux 2.6.14 from www.denx.de.I added and modified the file and compile it as what I did on Linux 2.4.25 which was also downloaded on www.denx.de. My board is base on MPC 857 ,and it goes well in Linux 2.4.25 . My bootloader is U-Boot 1.1.3 which goes well too. But when I bring up the Linux 2.6.14 ,I only got the information as follow :

## Booting image at ffc40000 ...
   Image Name:   Linux-2.6.14
   Created:      2005-11-17   7:11:42 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    678170 Bytes = 662.3 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ffd00000 ...
   Image Name:
   Created:      2005-11-09   9:28:27 UTC
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    1564369 Bytes =  1.5 MB
   Load Address: 00c00000
   Entry Point:  00c00000
   Verifying Checksum ... OK
   Loading Ramdisk to 00e3e000, end 00fbbed1 ... OK

And there is nothing output ,I thought that it was serial port fault . I checked my Linux configuration ,but found nothing .

How to make the linux 2.6.14 well on my board ??

 
   Any help on this would be greatly appreciated. Thanks for your patience. 

 				

　　zjznliang
　　　　zjznliang_popo at 163.com
　　　　　　2005-11-17