Board Bringup problem with 2.6.13.4

[David H. Lynch Jr]

I am working through bringing up Linux 2.6.13.4 on a Xilinx V4 based ppc405.
with memory from 0x0 through 0x7fffffff



Right now I get:

 >Starting MonitorX.elf: V3.3.2.0.
 >
 >loaded at:     00400000 0047F13C
 >board data at: 0047D128 0047D13C
 >relocated to:  00405300 00405314
 >zimage at:     00405A95 0047CE71
 >avail ram:     00480000 08000000
 >
 >Linux/PPC load: console=ttyS0,9600 console=tty0 init=/linuxrc 
looptype=squashfs cdroot splash=silentttttt
 >Uncompressing Linux......done.
 >Now booting the kernel

I have been able to trace execution into head_4xx.S  to immediately 
before turn_on_mmu:
But immediately after this I lose the ability to trace.

I have been tracing things with a status port at 0x70000000 I can write 
to and read from the host side with code like

    lis   r14,0x7000      /* debugging port */
    li   r15,0x2305      /* value to output */
    stw   r15,4(r14)  
    eieio
 
after turn_on_mmu executes this does not seem to work.
looking at other code it appeared that I needed to add
tophy(r14,r14) prior to the stw
but that does not seem to help.

What do I need to do to be able to continue to use my debug port ?