FW: Re: load u-boot.bin failure with BDI2000

[tuotuo wang]

hello,sam song:
   I have try my best to do this.I haven't another equipment,even the 
additional memory bank.

Mr.denk:
      I konw i must change the DIP switch,the actual problem to me is i 
don't konw how to deal with the config file.Could you give me some clear 
help.

>From: Sam Song <samlinuxppc at yahoo.com.cn>
>To: tuotuo wang <dvdstar at hotmail.com>
>CC: linuxppc-embedded at ozlabs.org
>Subject: Re: FW: Re: load u-boot.bin failure with BDI2000 
>Date: Mon, 30 May 2005 19:05:49 +0800 (CST)
>
>---"tuotuo wang" <dvdstar at hotmail.com> wrote:
> > > You know,my config file of BDI2000 is download
> > > from www.denx.de,because
> > > there have the sbc8260's.My board run the ppcboot
> > > at first,and i can use my
> > > BDI2000 properly with this config file.
>
>I perfer u to try again before taking a more
>complicated action. Just leave target itself and
>BDI2000, remove any other peripheral equipment.
>Perhaps it could recover from such a failure.
>
>I had the similar experience on 8xx board. Don't
>know whether it works for 82xx.
>
>Best regards,
>
>Sam
>

_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger:  http://messenger.msn.com/cn