[PATCH] ppc32: 0/2 add support for Sky Computers HDPU Compute blade

[Mark A. Greer]

Brian Waite wrote:

>On Thursday 17 March 2005 12:44, Mark A. Greer wrote:
>  
>
>>Brian Waite wrote:
>>
>>    
>>
>>>+#define HDPU_INTERNAL_SRAM_BASE               0xfbfc0000
>>>+#define HDPU_INTERNAL_SRAM_SIZE               0x00040000
>>> 
>>>
>>>      
>>>
>>I haven't gone through in detail yet but one thing I did notice was that 
>>you don't have the proper SRAM alignment or size.  The SRAM on the 
>>64[34]60 is 2MB so it must be aligned on a boundary that's a multiple of 
>>2MB.
>>
>>    
>>
>Mark, 
>	Argh that is a carry over from a bad experiment in consolidating memory space. 
>I don't use the SRAM for anything so it will not break the code so I will provide a patch on top 
>of the platform patch to fix this if that works for you.
>  
>

Brian,

I stand corrected.  Dale Farnsworth pointed out to me that its 2Mb (as 
in "bit") not byte.  I was reading the manual wrong.

Sorry 'bout that.

Mark