[PATCH] WDT Driver for Book-E [2/2] Device driver part.
Takeharu KATO
kato.takeharu at jp.fujitsu.com
Fri Mar 4 20:38:11 EST 2005
Matt and Kurmar:
I post the device driver part with this mail.
This is the last part of this driver.
Please apply.
Regards,
Signed-off-by: Takeharu KATO <kato.takeharu at jp.fujitsu.com>
--- linux-2.6.11/drivers/char/watchdog/Kconfig 2005-03-04 17:14:57.687966296 +0900
+++ linux-2.6.11-booke-wdt/drivers/char/watchdog/Kconfig 2005-03-04 13:21:32.000000000 +0900
@@ -346,6 +346,13 @@ config 8xx_WDT
tristate "MPC8xx Watchdog Timer"
depends on WATCHDOG && 8xx
+config BOOKE_WDT
+ bool "Book E(PowerPC 4xx/e500) Watchdog Timer"
+ depends on WATCHDOG && ( 4xx || E500 )
+ ---help---
+ This is the driver for the watchdog timers on
+ PowerPC 4xx and PowerPC e500.
+
# MIPS Architecture
config INDYDOG
--- linux-2.6.11/drivers/char/watchdog/Makefile 2005-03-04 17:15:30.582965496 +0900
+++ linux-2.6.11-booke-wdt/drivers/char/watchdog/Makefile 2005-03-04 13:21:32.000000000 +0900
@@ -39,3 +39,4 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.
obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
obj-$(CONFIG_IXP2000_WATCHDOG) += ixp2000_wdt.o
obj-$(CONFIG_8xx_WDT) += mpc8xx_wdt.o
+obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
--- linux-2.6.11/drivers/char/watchdog/booke_wdt.c 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.11-booke-wdt/drivers/char/watchdog/booke_wdt.c 2005-03-04 16:38:58.000000000 +0900
@@ -0,0 +1,664 @@
+/*
+ * Copyright (c) 2005 Fujitsu Limited
+ *
+ * Module name: booke_wdt.c
+ * Author: Takeharu KATO<kato.takeharu at jp.fujitsu.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * Neither Takeharu KATO nor Fujitsu Ltd. admit liability nor provide
+ * warranty for any of this software.
+ *
+ * Description:
+ * Watchdog driver for PowerPC Book E (PowerPC 4xx series processors and
+ * PowerPC e500 series processors).
+ * Derived from drivers/char/watchdog/wdt.c by Alan cox
+ * and drivers/char/watchdog/ppc405_wdt.c by Armin Kuster.
+ * PPC4xx WDT operation is driverd from Appendix of
+ * PowerPC Embedded Processors Application Note
+ * ``PowerPC 40x Watch Dog Timer'' published from IBM.
+ * This driver is written according to ``PowerPC e500 Core Complex
+ * Reference Manual'' for e500 part.
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/capability.h>
+#include <linux/string.h>
+#include <linux/ptrace.h>
+#include <asm/reg.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+#include "booke_wdt.h"
+
+/* micro seconds per one milli-second(used to calculatewatchdog
+ * counter to be set). */
+#define US_PER_MS 1000
+/* Calculate watchdog count */
+#define calculate_wdt_count(t) ((((unsigned long)(t))*HZ)/1000)
+
+int wdt_enable=0; /* WDT start on boot */
+int wdt_period=WDT_TIMO; /* Time out in ms */
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+static int nowayout = 1;
+#else
+static int nowayout = 0;
+#endif
+
+/*
+ * Global variables
+ */
+static int wdt_count = 0; /* WDT intrrupt counter to be reloaded */
+static volatile int wdt_heartbeat_count = 0; /* WDT intrrupt counter(compatible mode)*/
+static unsigned long driver_state; /* Driver status (see: booke_wdt.h) */
+/*
+ * Identifier for this watchdog
+ */
+static struct watchdog_info ident = {
+ .options=WDIOF_SETTIMEOUT|WDIOF_KEEPALIVEPING|WDIOF_MAGICCLOSE,
+ .firmware_version = 0, /* This is filled with PVR in initialization. */
+ .identity = "Book E(PPC 4xx/e500) WDT",
+};
+
+/*
+ * PowerPC Linux common exception handler
+ */
+extern void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+/* Panic notifier */
+extern struct notifier_block *panic_notifier_list;
+/*
+ * External linkage functions
+ */
+void booke_wdt_heartbeat(void);
+void booke_wdt_setup_options(char *cmd_line);
+void booke_wdt_exception(struct pt_regs *regs);
+/*
+ * Internal linkage functions
+ */
+static __inline__ void __booke_wdt_setup_val(int period,int reset);
+static __inline__ void __booke_wdt_enable(void);
+static __inline__ void __booke_wdt_disable(void);
+static __inline__ int __booke_wdt_is_enabled(void);
+static __inline__ void __booke_wdt_clear_int_stat(void);
+static __inline__ void __booke_wdt_set_timeout(int t);
+static __inline__ void booke_wdt_init_device(void);
+static __inline__ int booke_wdt_is_enabled(void);
+static __inline__ int booke_wdt_start(void);
+static __inline__ int booke_wdt_stop(void);
+static __inline__ int booke_wdt_ping(void);
+static __inline__ int booke_wdt_set_timeout(int t);
+static __inline__ int booke_wdt_get_status(int *status);
+static ssize_t booke_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos);
+static int booke_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,unsigned long arg);
+static int booke_wdt_open(struct inode *inode, struct file *file);
+static int booke_wdt_release(struct inode *inode, struct file *file);
+static int booke_wdt_notify_sys(struct notifier_block *this, unsigned long code,void *unused);
+static int __init booke_wdt_init(void);
+static void __exit booke_wdt_exit(void);
+
+/*
+ * Watchdog operations on PPC4xx/e500 MPU
+ */
+
+/**
+ * __booke_wdt_setup_val
+ * Enable Watchdog, sets up passed in values for TCR[WP],
+ * TCR[WRC]
+ *
+ * @period: Input Watchdog Period - TCR[WP]
+ * 0 = 217 clocks
+ * 1 = 221 clocks
+ * 2 = 225 clocks
+ * 3 = 229 clocks
+ * @reset: Watchdog reset control - TCR[WRC]
+ * 0 = No reset
+ * 1 = PPC Core reset only
+ * 2 = PPC Chip reset
+ * 3 = System reset
+ * Note: The meaning of period number is differ PPC440GP from PPC440GX.
+ */
+#if defined(CONFIG_4xx)
+static __inline__ void
+__booke_wdt_setup_val(int period,int reset)
+{
+ unsigned long val;
+
+ /* Set up TCR */
+ val=((period)<<WDT_TCR_WP_SHIFT|(reset)<<WDT_TCR_WRC_SHIFT)|mfspr(SPRN_TCR);
+ /* Disable WDT */
+ val &= ~(WDT_TCR_WDT_ENABLE);
+
+ mtspr(SPRN_TCR,val);
+}
+#else
+/* e500 */
+static __inline__ void
+__booke_wdt_setup_val(int period,int reset)
+{
+ unsigned long val;
+ /* Set up TCR */
+
+ val=(((period)&(WDT_TCR_WP_BITMSK)) << WDT_TCR_WP_SHIFT|
+ ( ( (period) >> 2 )&(WDT_TCR_WPEXT_BITMSK)) << WDT_TCR_WPEXT_SHIFT|
+ (reset)<<WDT_TCR_WRC_SHIFT)|mfspr(SPRN_TCR);
+ /* Disable WDT */
+ val &= ~(WDT_TCR_WDT_ENABLE);
+
+ mtspr(SPRN_TCR,val);
+}
+#endif /* CONFIG_E500 */
+/**
+ * __booke_wdt_enable
+ * Enable Watchdog
+ */
+static __inline__ void
+__booke_wdt_enable(void)
+{
+ mtspr(SPRN_TCR,(mfspr(SPRN_TCR)|WDT_TCR_WDT_ENABLE));
+}
+/**
+ * __booke_wdt_disable
+ * Disable Watchdog
+ */
+static __inline__ void
+__booke_wdt_disable(void)
+{
+ mtspr(SPRN_TCR,(mfspr(SPRN_TCR)&(~(WDT_TCR_WDT_ENABLE))));
+}
+/**
+ * __booke_wdt_is_enabled
+ * Check whether Watchdog is enabled.
+ */
+static __inline__ int
+__booke_wdt_is_enabled(void)
+{
+ return (mfspr(SPRN_TCR) & WDT_TCR_WDT_ENABLE);
+}
+/**
+ * __booke_wdt_clear_init_stat
+ * Clear interrupt status of watchdog to ping it.
+ */
+static __inline__ void
+__booke_wdt_clear_int_stat(void)
+{
+ mtspr(SPRN_TSR, (TSR_ENW|TSR_WIS));
+}
+/**
+ * __booke_wdt_set_timeout:
+ * @t: the new time out value that needs to be set.
+ *
+ * Set a new time out value for the watchdog device.
+ *
+ */
+static __inline__ void
+__booke_wdt_set_timeout(int t)
+{
+ wdt_count=calculate_wdt_count(t);
+ return;
+}
+
+/*
+ * Driver specific functions
+ */
+
+/**
+ * booke_wdt_setup_options
+ * @cmd_line : a pointer to kernel command line.
+ *
+ */
+void
+booke_wdt_setup_options(char *cmd_line)
+{
+/*
+ * Look for wdt= option on command line
+ */
+ if (strstr(cmd_line, "wdt=")) {
+ int valid_wdt = 0;
+ char *p, *q;
+
+ for (q = cmd_line; (p = strstr(q, "wdt=")) != 0;) {
+ q = p + 4;
+ if (p > cmd_line && p[-1] != ' ')
+ continue;
+ wdt_period = simple_strtoul(q, &q, 0);
+ valid_wdt = 1;
+ ++q;
+ }
+ wdt_enable = valid_wdt;
+ }
+ return;
+}
+/**
+ * booke_wdt_heartbeat:
+ * Ping routine called from kernel.
+ */
+void
+booke_wdt_heartbeat(void)
+{
+ /* Disable watchdog */
+ __booke_wdt_disable();
+
+ /* Write a watchdog value */
+ __booke_wdt_clear_int_stat();
+
+ if (!wdt_enable)
+ goto out;
+
+ if (wdt_heartbeat_count > 0)
+ wdt_heartbeat_count--;
+ else
+ panic(booke_mkmsg("Initiating system reboot.\n"));
+
+ /* Enable watchdog */
+ __booke_wdt_enable();
+ out:
+ /* Reset count */
+ ppc_md.heartbeat_count = 0;
+}
+/**
+ * booke_wdt_exception:
+ * WatchDog Exception handler for PPC4xx/e500.
+ * @regs : A registers information.
+ */
+void
+booke_wdt_exception(struct pt_regs *regs)
+{
+ wdt_enable=0;
+ __booke_wdt_disable();
+ printk("WDT Exception at PC: %lx, MSR: %lx, vector=%lx %s\n",
+ regs->nip, regs->msr, regs->trap, print_tainted());
+ panic(booke_mkmsg("Initiating system reboot.\n"));
+}
+/*
+ * Driver Logic functions
+ */
+static __inline__ int
+booke_wdt_is_enabled(void)
+{
+ return __booke_wdt_is_enabled();
+}
+/**
+ * booke_wdt_start:
+ *
+ * Start the watchdog driver.
+ */
+static __inline__ int
+booke_wdt_start(void)
+{
+ __booke_wdt_enable();
+ return 0;
+}
+
+/**
+ * booke_wdt_stop:
+ *
+ * Stop the watchdog driver.
+ */
+static __inline__ int
+booke_wdt_stop (void)
+{
+ __booke_wdt_disable();
+ return 0;
+}
+/**
+ * booke_wdt_ping:
+ *
+ * Reload counter one with the watchdog heartbeat. We don't bother reloading
+ * the cascade counter.
+ */
+static __inline__ int
+booke_wdt_ping(void)
+{
+ /* Disable watchdog */
+ __booke_wdt_disable();
+ /* Write a watchdog value */
+ __booke_wdt_clear_int_stat();
+ /* Reset count */
+ wdt_heartbeat_count=wdt_count;
+ /* Enable watchdog */
+ __booke_wdt_enable();
+
+ return 0;
+}
+/**
+ * booke_wdt_set_timeout:
+ * @t: the new timeout value that needs to be set.
+ *
+ * Set a new time out value for the watchdog device.
+ * If the heartbeat value is incorrect we keep the old value
+ * and return -EINVAL. If successfull we return 0.
+ */
+static __inline__ int
+booke_wdt_set_timeout(int t)
+{
+ if ((t < WDT_HEARTBEAT_MIN) || (t > WDT_HEARTBEAT_MAX))
+ return -EINVAL;
+
+ wdt_period = t;
+ __booke_wdt_set_timeout(t);
+ wdt_heartbeat_count=wdt_count;
+ booke_wdt_dbg("The WDT counter set %d.\n",wdt_count);
+
+ return 0;
+}
+
+/**
+ * booke_wdt_get_status:
+ * @status: the new status.
+ *
+ * Return the enable/disable card status.
+ */
+static __inline__ int
+booke_wdt_get_status(int *status)
+{
+ if (wdt_enable)
+ *status = WDIOS_ENABLECARD;
+ else
+ *status = WDIOS_DISABLECARD;
+
+ return 0;
+}
+/*
+ * Kernel Interfaces
+ */
+/**
+ * booke_wdt_init_device:
+ *
+ * Initilize PowerPC 4xx/e500 family Watch Dog facility.
+ */
+static void
+booke_wdt_init_device(void)
+{
+ /* Hardware WDT provided by the processor.
+ * So, we set firmware version as processor version number.
+ */
+ ident.firmware_version=mfspr(PVR);
+ __booke_wdt_setup_val(WDT_WP,WDT_RESET_NONE);
+}
+/**
+ * booke_wdt_write:
+ * @file: file handle to the watchdog
+ * @buf: buffer to write (unused as data does not matter here
+ * @count: count of bytes
+ * @ppos: pointer to the position to write. No seeks allowed
+ *
+ * A write to a watchdog device is defined as a keepalive signal. Any
+ * write of data will do, as we we don't define content meaning expept
+ * 'V' character. It is performed as a sign to set stop-on-close mode.
+ */
+
+static ssize_t
+booke_wdt_write(struct file *file, const char *buf, size_t count, loff_t *ppos)
+{
+ size_t i;
+
+ if (!nowayout) {
+ /* In case it was set long ago */
+ clear_bit(WDT_STATE_STOP_ON_CLOSE, &driver_state);
+
+ for (i = 0; i < count; i++) {
+ char c;
+
+ if (get_user(c, buf + i))
+ return -EFAULT;
+
+ if (c == 'V') {
+ set_bit(WDT_STATE_STOP_ON_CLOSE, &driver_state);
+ }
+ }
+ }
+ booke_wdt_ping();
+
+ return count;
+}
+
+/**
+ * booke_wdt_ioctl:
+ * @inode: inode of the device
+ * @file: file handle to the device
+ * @cmd: watchdog command
+ * @arg: argument pointer
+ *
+ */
+static int
+booke_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int new_timeout;
+ int status;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM; /* It may be too strict manner. */
+ switch(cmd)
+ {
+ default:
+ return -ENOIOCTLCMD;
+ case WDIOC_GETSUPPORT:
+ if (copy_to_user((struct watchdog_info *)arg, &ident, sizeof(struct watchdog_info)))
+ return -EFAULT;
+ else
+ break;
+ case WDIOC_GETSTATUS:
+ booke_wdt_get_status(&status);
+ return put_user(status,(int *)arg);
+ case WDIOC_KEEPALIVE:
+ booke_wdt_ping();
+ break;
+ case WDIOC_SETTIMEOUT:
+ if (get_user(new_timeout, (int *)arg))
+ return -EFAULT;
+ if (booke_wdt_set_timeout(new_timeout))
+ return -EINVAL;
+ booke_wdt_ping();
+ break;
+ case WDIOC_GETTIMEOUT:
+ return put_user(wdt_period, (int *)arg);
+ case WDIOC_SETOPTIONS:
+ if (get_user(status, (int *)arg))
+ return -EFAULT;
+ /* Return -EINVAL when the driver can not figure out
+ * what it should do. Unknown cases are just ignored.
+ */
+ if ( (status & (WDIOS_DISABLECARD|WDIOS_ENABLECARD))
+ == (WDIOS_DISABLECARD|WDIOS_ENABLECARD) )
+ return -EINVAL;
+ if (status & WDIOS_DISABLECARD) {
+ wdt_enable = 0;
+ booke_wdt_stop();
+ booke_wdt_info("Watchdog timer is disabled\n");
+ }
+ if (status & WDIOS_ENABLECARD) {
+ wdt_enable = 1;
+ booke_wdt_start();
+ booke_wdt_info("Watchdog timer is enabled\n");
+ }
+ break;
+ }
+ return 0;
+}
+/**
+ * booke_wdt_open:
+ * @inode: inode of device
+ * @file: file handle to device
+ *
+ * The watchdog device has been opened. The watchdog device is single
+ * open and start the WDT timer.
+ */
+static int
+booke_wdt_open(struct inode *inode, struct file *file)
+{
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (test_and_set_bit(WDT_STATE_OPEN, &driver_state))
+ return -EBUSY;
+ /*
+ * Activate
+ */
+ booke_wdt_start();
+ wdt_enable=1;
+
+ if (nowayout)
+ set_bit(WDT_STATE_STOP_ON_CLOSE, &driver_state);
+
+ return 0;
+}
+
+/**
+ * booke_wdt_release:
+ * @inode: inode to board
+ * @file: file handle to board
+ *
+ */
+static int
+booke_wdt_release(struct inode *inode, struct file *file)
+{
+ if (test_bit(WDT_STATE_STOP_ON_CLOSE, &driver_state)) {
+ booke_wdt_note("WDT device is stopped.\n");
+ booke_wdt_stop();
+ wdt_enable=0;
+ } else {
+ if ( (booke_wdt_is_enabled()) && (!nowayout) ) {
+ booke_wdt_note("WDT device may be closed unexpectedly. WDT will not stop!\n");
+ booke_wdt_ping();
+ }
+ }
+ clear_bit(WDT_STATE_OPEN, &driver_state);
+
+ return 0;
+}
+/**
+ * notify_sys:
+ * @this: our notifier block
+ * @code: the event being reported
+ * @unused: unused
+ * Note: This function assume that the panic notifier is called with CODE=0
+ * (see panic function in kernel/panic.c).
+ */
+static int
+booke_wdt_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+
+ if (code != SYS_POWER_OFF) /* Turn the card off */
+ booke_wdt_stop();
+
+ return NOTIFY_DONE;
+}
+
+static struct file_operations booke_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = booke_wdt_write,
+ .ioctl = booke_wdt_ioctl,
+ .open = booke_wdt_open,
+ .release = booke_wdt_release,
+};
+
+static struct miscdevice booke_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &booke_wdt_fops,
+};
+
+/*
+ * The WDT card needs to know about shutdowns in order to
+ * turn WDT off.
+ */
+
+static struct notifier_block booke_wdt_notifier = {
+ .notifier_call = booke_wdt_notify_sys,
+};
+
+/**
+ * cleanup_module:
+ *
+ * If your watchdog is set to continue ticking on close and you unload
+ * it, well it keeps ticking. You just have to load a new
+ * module in 60 seconds or reboot.
+ * This behavior(more over the comments as above) is borrowed from
+ * Alan cox's driver.
+ */
+
+static void __exit
+booke_wdt_exit(void)
+{
+ misc_deregister(&booke_wdt_miscdev);
+ unregister_reboot_notifier(&booke_wdt_notifier);
+ notifier_chain_unregister(&panic_notifier_list,&booke_wdt_notifier);
+}
+
+/**
+ * booke_wdt_init:
+ *
+ * Set up the WDT relevant timer facility.
+ */
+
+static int __init
+booke_wdt_init(void)
+{
+ int ret;
+ unsigned long flags;
+
+ ret = register_reboot_notifier(&booke_wdt_notifier);
+ if(ret) {
+ booke_wdt_err("Cannot register reboot notifier (err=%d)\n", ret);
+ return ret;
+ }
+
+ /* Register panic notifier */
+ ret = notifier_chain_register(&panic_notifier_list,&booke_wdt_notifier);
+ if(ret) {
+ booke_wdt_err("Cannot register panic notifier (err=%d)\n", ret);
+ unregister_reboot_notifier(&booke_wdt_notifier);
+ return ret;
+ }
+
+ ret = 0;
+ booke_wdt_init_device();
+ /* Check that the heartbeat value is within it's range ; if not reset to the default */
+ if (booke_wdt_set_timeout(wdt_period)) {
+ if (wdt_period)
+ booke_wdt_info("The heartbeat value must be %d < wdt_period < %d, using
%d\n",WDT_HEARTBEAT_MIN,WDT_HEARTBEAT_MAX,WDT_TIMO);
+ booke_wdt_set_timeout(WDT_TIMO);
+ }
+
+ local_irq_save(flags); /* Prevent timer interrupt */
+ ppc_md.heartbeat_count = 0;
+ ppc_md.heartbeat=booke_wdt_heartbeat;
+ local_irq_restore(flags);
+
+ booke_wdt_info("Book E(PPC 4xx/e500) Watchdog Driver. period=%d ms (nowayout=%d)\n",wdt_period,
nowayout);
+
+ ret = misc_register(&booke_wdt_miscdev);
+ if (ret) {
+ booke_wdt_err("Cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto outmisc;
+ }
+
+ if (wdt_enable) {
+ booke_wdt_info("WDT start on boot.\n");
+ booke_wdt_start();
+ }
+out:
+ return ret;
+outmisc:
+ unregister_reboot_notifier(&booke_wdt_notifier);
+ local_irq_save(flags);
+ ppc_md.heartbeat=NULL;
+ ppc_md.heartbeat_count = 0;
+ local_irq_restore(flags);
+ goto out;
+}
+
+device_initcall(booke_wdt_init);
--- linux-2.6.11/drivers/char/watchdog/booke_wdt.h 1970-01-01 09:00:00.000000000 +0900
+++ linux-2.6.11-booke-wdt/drivers/char/watchdog/booke_wdt.h 2005-03-04 16:38:58.000000000 +0900
@@ -0,0 +1,125 @@
+/*
+ *
+ * Copyright (c) 2004 Fujitsu Limited
+ *
+ * Module name: booke_wdt.h
+ * Author: Takeharu KATO<kato.takeharu at jp.fujitsu.com>
+ * Description:
+ * Header file for PowerPC Book E(PPC 4xx/e500) watchdog driver.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * Neither Takeharu KATO nor Fujitsu Ltd. admit liability nor provide
+ * warranty for any of this software.
+ *
+ */
+#ifndef _DRIVERS_CHAR_WATCHDOG_BOOKE_WDT_H
+#define _DRIVERS_CHAR_WATCHDOG_BOOKE_WDT_H
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/watchdog.h>
+
+/*
+ * Driver state flags(bit position)
+ */
+#define WDT_STATE_OPEN 0 /* driver is opend */
+#define WDT_STATE_STOP_ON_CLOSE 1 /* Stop with close is expected */
+/*
+ * Configurations
+ */
+#define WDT_TIMO 60000 /* Default timeout = 60000 ms(1min) */
+#define WDT_HEARTBEAT_MIN 100 /* Minimum timeout = 100 ms */
+#define WDT_HEARTBEAT_MAX 600000 /* Maximum timeout = 600000ms(1hour) */
+#ifdef __KERNEL__
+//#define BOOKE_WDT_DEBUG /* Debug switch */
+/*
+ * Reset type
+ */
+#define WDT_RESET_NONE 0
+#define WDT_RESET_CORE 1
+#define WDT_RESET_CHIP 2
+#define WDT_RESET_SYS 3
+/*
+ * Bit positions in TCR register on PPC4xx/e500 series.
+ */
+#define WDT_TCR_WP_BIT 1 /* WP bit in TCR (bit[0..1]) */
+#define WDT_TCR_WRC_BIT 3 /* WRC bit in TCR (bit[2..3]) */
+#define WDT_TCR_WIE_BIT 4 /* WIE bit in TCR (bit[4]) */
+/*
+ * TCR[WP] relevant definitions
+ */
+#define WDT_TCR_WP_SHIFT (31 - WDT_TCR_WP_BIT)
+#define WDT_TCR_WRC_SHIFT (31 - WDT_TCR_WRC_BIT)
+#define WDT_TCR_WIE_SHIFT (31 - WDT_TCR_WIE_BIT)
+#define WDT_TCR_WDT_ENABLE (1<<WDT_TCR_WIE_SHIFT)
+/* MASK value to obatain TCR[WP] */
+#define WDT_TCR_WP_MASK (3<<(WDT_TCR_WP_SHIFT))
+
+/* Watchdog timer periods can be set on PPC 4xx cpus. */
+#if defined(CONFIG_4xx)
+/*
+ * For PowerPC 4xx
+ */
+#define WDT_WP0 0
+#define WDT_WP1 1
+#define WDT_WP2 2
+#define WDT_WP3 3
+#else
+#if defined(CONFIG_E500)
+/*
+ * For e500 CPU
+ * Actually, e500 can arbitrary periods can be set,
+ * But this driver uses fix period value as same as PPC440
+ * on purpose for simplicity.
+ * Following values split into WP and WP_EXT parts in booke_wdt.c.
+ */
+#define WDT_WP0 21
+#define WDT_WP1 25
+#define WDT_WP2 29
+#define WDT_WP3 33
+#define WDT_TCR_WP_BITMSK 0x3 /* 2bit length */
+#define WDT_TCR_WPEXT_BITMSK 0xf /* 4bit length */
+#define WDT_TCR_WPEXT_SHIFT 17
+#else
+#error "Book E WDT detects invalid configuration(Unknown CPU)"
+#endif /* CONFIG_E500 */
+#endif /* CONFIG_4xx */
+/*
+ * WP relevant values used in our driver.
+ * Note:WDT period must be more than HZ(Timer ticks)
+ */
+#define WDT_WP WDT_WP3
+
+/*
+ * IOCTL commands for comaptiblity for old driver
+ */
+#define WDIOC_GETPERIOD WDIOC_GETTIMEOUT
+#define WDIOC_SETPERIOD WDIOC_SETTIMEOUT
+
+/*
+ * output messages
+ */
+#define __BOOKE_WDT_MSG "BookE-WDT : "
+#define booke_mkmsg(str) __BOOKE_WDT_MSG str
+#define booke_wdt_info(fmt,arg...) \
+ printk(KERN_INFO __BOOKE_WDT_MSG fmt,##arg)
+#define booke_wdt_note(fmt,arg...) \
+ printk(KERN_NOTICE __BOOKE_WDT_MSG fmt,##arg)
+#define booke_wdt_err(fmt,arg...) \
+ printk(KERN_ALERT __BOOKE_WDT_MSG fmt,##arg)
+#define booke_wdt_crit(fmt,arg...) \
+ printk(KERN_ALERT __BOOKE_WDT_MSG fmt,##arg)
+#if defined(BOOKE_WDT_DEBUG)
+#define booke_wdt_dbg(fmt,arg...) \
+ printk(KERN_ALERT __BOOKE_WDT_MSG fmt,##arg)
+#else
+#define booke_wdt_dbg(fmt,arg...) \
+ do{}while(0)
+#endif /* WDT_DEBUG */
+
+#endif /* __KERNEL__ */
+#endif /* _DRIVERS_CHAR_WATCHDOG_BOOKE_WDT_H */
More information about the Linuxppc-embedded
mailing list