[PATCH 2.6.11-rc4] ppc: add support for Radstone ppc7d boards

[James Chapman]

Hi Mark,

Thanks for reviewing my patch.

Mark A. Greer wrote:

>  >  diff -Nru a/arch/ppc/platforms/radstone_ppc7d.c 
> b/arch/ppc/platforms/radstone_ppc7d.c
>  > +void __init ppc7d_setup_peripherals(void)
> 
>  > +       val32 = mv64x60_read(&bh, MV64x60_PCI1_PCI_DECODE_CNTL);
>  > +       val32 &= ~(1 << 3);
>  > +       mv64x60_write(&bh, MV64x60_PCI1_PCI_DECODE_CNTL, val32);
> 
> Bit 3 is already cleared by the core code.

Oh ok. I'll remove it.

>  > +       /* Setup P2P for PCI#0 */
>  > +       val32 = mv64x60_read(&bh, MV64x60_PCI0_P2P_CONFIG);
>  > +       val32 &= ~(0x00ffffff);
>  > +       val32 |= ((bh.hose_a->first_busno & 0xff) << 16);
> etc.
> 
> Do you really use the P2P bridge?  Unless I missed something, I think it 
> remains disabled.  You shouldn't need it unless you have PCI devices on 
> one hose directly accessing PCI devices on the other hose.  The P2P 
> stuff seems complicated & unnecessary.

It was a feature that the Radstone folk wanted to allow, although they
had no application for it at the time. I can probably just remove that
code for now - if they ever do want to add that support, it would be
a separate patch.

I'll retest with the above code removed and submit a new patch.

-- 
James Chapman
PGP key : http://www.katalix.com/~jchapman/pgpkey.txt