MPC8272 runs application with segmentation fault
Nai-Hsien
dennis at loop.com.tw
Thu Jun 9 00:51:48 EST 2005
Kumar,
I got the kernel from Montavista version 3.1, which uses Linux kernel
2.4.20.
According to readelf, my libc is version 2.3.2, which is also from
Montavista.
In cputable.c, I already added following entry for MPC8272.
{ /* 827x, 828x (8270, 8275, 8280, 8272 are all 603e cores) */
0x7fff0000, 0x00820000, "827x & 828x",
CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_CAN_DOZE | CPU_FTR_USE_TB,
COMMON_PPC,
256, 256,
__setup_cpu_603
},
Regards
Dennis
----- Original Message -----
From: "Kumar Gala" <kumar.gala at freescale.com>
To: "Nai-Hsien" <dennis at loop.com.tw>
Cc: <linuxppc-embedded at ozlabs.org>; "Andrew Williams" <awilliam at nortel.com>
Sent: Wednesday, June 08, 2005 9:52 PM
Subject: Re: MPC8272 runs application with segmentation fault
> A few questions, where did you get the kernel for the 8272 you are
> using? Can you report back what libc version you are running with.
> Also, can see what entry in arch/ppc/kernel/cputable.c has a pvr_value
> of 0x00820000 and report that back as well.
>
> - kumar
>
> On Jun 8, 2005, at 8:39 AM, Nai-Hsien wrote:
>
> > Andrew,
> > I believe I already modify my u-boot to detect the processor.
> >
> > If I statically link my program, I find that the program can run
> > on my MPC8272 platform properly, so I think maybe the problem
> > is caused by shared library. However, the same file system (of course,
> > same shared library) can run on my MPC8245 platform.
> >
> > With the observation, I think my kernel is not handling shared library
> > properly. Is there any part of the kernel I should check?
> >
> > I added some code in do_page_fault() to dump some information, shown
> > as below, when my program get problem.
> >
> > PID=34(console): Trap=300, NIP=0x0ffc6d90, LR=0x0ffc6d20, VM:
> > (start=0x30000000,
> > end=0x30017000, flags=0x00000875), addr=0x2e313056
> > Segmentation fault
> >
> > Thank you
> > Dennis
> >
> >
> > ----- Original Message -----
> > From: Andrew <mailto:awilliam at nortel.com> Williams
> > To: Nai-Hsien <mailto:dennis at loop.com.tw> ;
> > linuxppc-embedded at ozlabs.org
> > Sent: Tuesday, June 07, 2005 10:17 PM
> > Subject: RE: MPC8272 runs application with segmentation fault
> >
> > Take a alook at the checkcpu() routine in /cpu/mpc8260/cpu.c .
> > Validate that your CPU is correctly being identified, and thus
> > initialized.
> > We had identical symptoms with the 8270.
> >
> > We added the following after the case for the PVR_8260_HIP7:
> >
> > case PVR_8280a_HIP7:
> > case PVR_8280_HIP7:
> > k = 7;
> > printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
> > break;
> >
> > include/asm-ppc/processor.h
> >
> > #define PVR_8280_HIP7 0x80822013
> > #define PVR_8280a_HIP7 0x80822014
> >
> > A.
> >
> > -----Original Message-----
> > From: linuxppc-embedded-bounces at ozlabs.org
> > [mailto:linuxppc-embedded-bounces at ozlabs.org] On Behalf Of Nai-Hsien
> > Sent: June 7, 2005 9:11 AM
> > To: linuxppc-embedded at ozlabs.org
> > Subject: MPC8272 runs application with segmentation fault
> >
> >
> > Dear experts,
> >
> > I have two hardware boards, one uses MPC8245 and the other one uses
> > MPC8272.
> > Initially, I use the MPC8245 board to port Linux 2.4.20 and write some
> > applications.
> > I already do a lot of test on the MPC8245 board and all my application
> > programs work
> > fine.
> >
> > After this, I use the same kernel configuration and same file system
> > that are being used
> > by the MPC8245 board to port the whole system to my MPC8272.
> > Now, I can boot the kernel and run busybox well. However, when
> > I run my application programs, I always get segmentation fault.
> > Following is a strace
> > dump. Could anybody give me some idea?
> >
> > Thank you
> > Dennis
> >
> > ====================================================
> > execve("sbin/console", ["sbin/console"], [/* 6 vars */]) = 0
> > uname({sys="Linux", node="6200_linux", ...}) = 0
> > brk(0) = 0x10059134
> > open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
> > directory)
> > open("/etc/ld.so.cache", O_RDONLY) = -1 ENOENT (No such file or
> > directory)
> > open("/lib/libncurses.so.5", O_RDONLY) = 3
> > read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\001"...,
> > 1024) = 1024
> > fstat64(0x3, 0x7ffff098) = 0
> > mmap(0xff97000, 362628, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> > 0xff97000
> > mprotect(0xffd4000, 112772, PROT_NONE) = 0
> > mmap(0xffd7000, 86016, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED, 3, 0x30000) = 0xffd7000
> > mmap(0xffec000, 14468, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xffec000
> > close(3) = 0
> > open("/lib/libdl.so.2", O_RDONLY) = 3
> > read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\0\34"...,
> > 1024) = 1024
> > fstat64(0x3, 0x7ffff078) = 0
> > mmap(0xff74000, 74812, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> > 0xff74000
> > mprotect(0xff77000, 62524, PROT_NONE) = 0
> > mmap(0xff84000, 12288, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xff84000
> > close(3) = 0
> > open("/lib/libnsl.so.1", O_RDONLY) = 3
> > read(3,
> > "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\0A\274"..., 1024)
> > = 1024
> > fstat64(0x3, 0x7ffff058) = 0
> > mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
> > 0) = 0x30017000
> > mmap(0xff3e000, 152068, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> > 0xff3e000
> > mprotect(0xff51000, 74244, PROT_NONE) = 0
> > mmap(0xff5e000, 12288, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED, 3, 0x10000) = 0xff5e000
> > mmap(0xff61000, 8708, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xff61000
> > close(3) = 0
> > open("/lib/libc.so.6", O_RDONLY) = 3
> > read(3, "\177ELF\1\2\1\0\0\0\0\0\0\0\0\0\0\3\0\24\0\0\0\1\0\1\322"...,
> > 1024) = 1024
> > fstat64(0x3, 0x7ffff038) = 0
> > mmap(0xfddd000, 1379388, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> > 0xfddd000
> > mprotect(0xff16000, 97340, PROT_NONE) = 0
> > mmap(0xff1d000, 61440, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED, 3, 0x130000) = 0xff1d000
> > mmap(0xff2c000, 7228, PROT_READ|PROT_WRITE|PROT_EXEC,
> > MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xff2c000
> > close(3) = 0
> > brk(0) = 0x10059134
> > brk(0x1005a134) = 0x1005a134
> > brk(0x1005b000) = 0x1005b000
> > write(2, "before init_ncurses()\n", 22) = 22
> > write(2, "before initscr()\n", 17) = 17
> > access("/usr/share/terminfo/v/vt100", R_OK) = 0
> > open("/usr/share/terminfo/v/vt100", O_RDONLY) = 3
> > read(3, "\32\1,\0\25\0\7\0\16\1\3\2", 12) = 12
> > read(3, "vt100|vt100-am|dec vt100 (w/adva"..., 44) = 44
> > read(3, "\0\1\0\0\1\0\0\0\0\0\0\0\0\0\1\0\0\0\0\0\1", 21) = 21
> > read(3, "\0", 1) = 1
> > read(3, "P\0\10\0\30\0\377\377\377\377\377\377\3\0", 14) = 14
> > read(3, "\377\377\0\0\2\0\4\0\25\0\32\0&\0.\0\377\377\377\3777\0"...,
> > 540) = 540
> > read(3, "\7\0\r\0\33[%i%p1%d;%p2%dr\0\33[3g\0\33[H\33[J"..., 515) = 515
> > read(3, "", 1) = 0
> > read(3, "", 10) = 0
> > close(3) = 0
> > -- SIGSEGV (Segmentation fault) @ 0 (0) ---
> > +++ killed by SIGSEGV +++
> > Segmentation fault
> >
> >
> >
> > <ATT169162.txt>
>
>
More information about the Linuxppc-embedded
mailing list