[PATCH][4/5] RapidIO support: ppc32
Kumar Gala
kumar.gala at freescale.com
Wed Jun 8 14:43:26 EST 2005
Two questions:
1. how well does will all of this handle > 32-bit phys addr?
2. can we make any of this a platform driver?
I would prefer if we could have the memory offsets and irq's not be
straight from the #define's
- kumar
On Jun 6, 2005, at 5:40 PM, Matt Porter wrote:
> Adds PPC32 RIO support. Init code for the MPC85xx RIO ports
> and glue for the STx GP3 board to use it.
>
> Signed-off-by: Matt Porter <mporter at kernel.crashing.org>
>
> diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig
> --- a/arch/ppc/Kconfig
> +++ b/arch/ppc/Kconfig
> @@ -1177,6 +1177,14 @@ source "drivers/pci/Kconfig"
>
> source "drivers/pcmcia/Kconfig"
>
> +config RAPIDIO
> + bool "RapidIO support" if MPC8540 || MPC8560
> + help
> + If you say Y here, the kernel will include drivers and
> + infrastructure code to support RapidIO interconnect devices.
> +
> +source "drivers/rio/Kconfig"
> +
> endmenu
>
> menu "Advanced setup"
> diff --git a/arch/ppc/configs/stx_gp3_defconfig
> b/arch/ppc/configs/stx_gp3_defconfig
> --- a/arch/ppc/configs/stx_gp3_defconfig
> +++ b/arch/ppc/configs/stx_gp3_defconfig
> @@ -1,7 +1,7 @@
> #
> # Automatically generated make config: don't edit
> -# Linux kernel version: 2.6.11-rc2
> -# Wed Jan 26 14:32:58 2005
> +# Linux kernel version: 2.6.12-rc4
> +# Tue May 24 18:11:04 2005
> #
> CONFIG_MMU=y
> CONFIG_GENERIC_HARDIRQS=y
> @@ -11,6 +11,7 @@ CONFIG_HAVE_DEC_LOCK=y
> CONFIG_PPC=y
> CONFIG_PPC32=y
> CONFIG_GENERIC_NVRAM=y
> +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
>
> #
> # Code maturity level options
> @@ -18,6 +19,7 @@ CONFIG_GENERIC_NVRAM=y
> CONFIG_EXPERIMENTAL=y
> CONFIG_CLEAN_COMPILE=y
> CONFIG_BROKEN_ON_SMP=y
> +CONFIG_INIT_ENV_ARG_LIMIT=32
>
> #
> # General setup
> @@ -29,7 +31,6 @@ CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> # CONFIG_AUDIT is not set
> -CONFIG_LOG_BUF_SHIFT=14
> CONFIG_HOTPLUG=y
> CONFIG_KOBJECT_UEVENT=y
> # CONFIG_IKCONFIG is not set
> @@ -37,6 +38,9 @@ CONFIG_EMBEDDED=y
> CONFIG_KALLSYMS=y
> # CONFIG_KALLSYMS_ALL is not set
> # CONFIG_KALLSYMS_EXTRA_PASS is not set
> +CONFIG_PRINTK=y
> +CONFIG_BUG=y
> +CONFIG_BASE_FULL=y
> CONFIG_FUTEX=y
> CONFIG_EPOLL=y
> # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
> @@ -46,6 +50,7 @@ CONFIG_CC_ALIGN_LABELS=0
> CONFIG_CC_ALIGN_LOOPS=0
> CONFIG_CC_ALIGN_JUMPS=0
> # CONFIG_TINY_SHMEM is not set
> +CONFIG_BASE_SMALL=0
>
> #
> # Loadable module support
> @@ -69,9 +74,11 @@ CONFIG_KMOD=y
> CONFIG_E500=y
> CONFIG_BOOKE=y
> CONFIG_FSL_BOOKE=y
> +# CONFIG_PHYS_64BIT is not set
> # CONFIG_SPE is not set
> CONFIG_MATH_EMULATION=y
> # CONFIG_CPU_FREQ is not set
> +# CONFIG_PM is not set
> CONFIG_85xx=y
> CONFIG_PPC_INDIRECT_PCI_BE=y
>
> @@ -96,6 +103,7 @@ CONFIG_HIGHMEM=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=m
> # CONFIG_CMDLINE_BOOL is not set
> +CONFIG_ISA_DMA_API=y
>
> #
> # Bus options
> @@ -104,15 +112,15 @@ CONFIG_PCI=y
> CONFIG_PCI_DOMAINS=y
> # CONFIG_PCI_LEGACY_PROC is not set
> # CONFIG_PCI_NAMES is not set
> +# CONFIG_PCI_DEBUG is not set
>
> #
> # PCCARD (PCMCIA/CardBus) support
> #
> # CONFIG_PCCARD is not set
> -
> -#
> -# PC-card bridges
> -#
> +CONFIG_RAPIDIO=y
> +CONFIG_RAPIDIO_8_BIT_TRANSPORT=y
> +CONFIG_RAPIDIO_DISC_TIMEOUT=30
>
> #
> # Advanced setup
> @@ -152,7 +160,7 @@ CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> -# CONFIG_PARPORT_OTHER is not set
> +# CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_1284 is not set
>
> #
> @@ -264,7 +272,6 @@ CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_EATA is not set
> -# CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_IPS is not set
> @@ -274,7 +281,6 @@ CONFIG_SCSI_CONSTANTS=y
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_IPR is not set
> -# CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> CONFIG_SCSI_QLA2XXX=m
> @@ -283,6 +289,7 @@ CONFIG_SCSI_QLA2XXX=m
> # CONFIG_SCSI_QLA2300 is not set
> # CONFIG_SCSI_QLA2322 is not set
> # CONFIG_SCSI_QLA6312 is not set
> +# CONFIG_SCSI_LPFC is not set
> # CONFIG_SCSI_DC395x is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_NSP32 is not set
> @@ -322,7 +329,6 @@ CONFIG_NET=y
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> -# CONFIG_NETLINK_DEV is not set
> CONFIG_UNIX=y
> # CONFIG_NET_KEY is not set
> CONFIG_INET=y
> @@ -431,7 +437,7 @@ CONFIG_IP_NF_NAT_FTP=m
> #
> # Network testing
> #
> -# CONFIG_NET_PKTGEN is not set
> +CONFIG_NET_PKTGEN=y
> # CONFIG_NETPOLL is not set
> # CONFIG_NET_POLL_CONTROLLER is not set
> # CONFIG_HAMRADIO is not set
> @@ -499,6 +505,7 @@ CONFIG_GFAR_NAPI=y
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> +CONFIG_RIONET=y
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PLIP is not set
> @@ -536,20 +543,6 @@ CONFIG_INPUT_EVDEV=m
> # CONFIG_INPUT_EVBUG is not set
>
> #
> -# Input I/O drivers
> -#
> -# CONFIG_GAMEPORT is not set
> -CONFIG_SOUND_GAMEPORT=y
> -CONFIG_SERIO=y
> -CONFIG_SERIO_I8042=y
> -CONFIG_SERIO_SERPORT=y
> -# CONFIG_SERIO_CT82C710 is not set
> -# CONFIG_SERIO_PARKBD is not set
> -# CONFIG_SERIO_PCIPS2 is not set
> -CONFIG_SERIO_LIBPS2=y
> -# CONFIG_SERIO_RAW is not set
> -
> -#
> # Input Device Drivers
> #
> CONFIG_INPUT_KEYBOARD=y
> @@ -567,6 +560,19 @@ CONFIG_MOUSE_PS2=y
> # CONFIG_INPUT_MISC is not set
>
> #
> +# Hardware I/O ports
> +#
> +CONFIG_SERIO=y
> +CONFIG_SERIO_I8042=y
> +CONFIG_SERIO_SERPORT=y
> +# CONFIG_SERIO_PARKBD is not set
> +# CONFIG_SERIO_PCIPS2 is not set
> +CONFIG_SERIO_LIBPS2=y
> +# CONFIG_SERIO_RAW is not set
> +# CONFIG_GAMEPORT is not set
> +CONFIG_SOUND_GAMEPORT=y
> +
> +#
> # Character devices
> #
> # CONFIG_VT is not set
> @@ -590,6 +596,7 @@ CONFIG_SERIAL_CPM_SCC2=y
> # CONFIG_SERIAL_CPM_SCC4 is not set
> # CONFIG_SERIAL_CPM_SMC1 is not set
> # CONFIG_SERIAL_CPM_SMC2 is not set
> +# CONFIG_SERIAL_JSM is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_LEGACY_PTYS=y
> CONFIG_LEGACY_PTY_COUNT=256
> @@ -626,6 +633,11 @@ CONFIG_DRM=m
> # CONFIG_RAW_DRIVER is not set
>
> #
> +# TPM devices
> +#
> +# CONFIG_TCG_TPM is not set
> +
> +#
> # I2C support
> #
> CONFIG_I2C=m
> @@ -648,12 +660,12 @@ CONFIG_I2C_ALGOBIT=m
> # CONFIG_I2C_AMD8111 is not set
> # CONFIG_I2C_I801 is not set
> # CONFIG_I2C_I810 is not set
> +# CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_ISA is not set
> # CONFIG_I2C_MPC is not set
> # CONFIG_I2C_NFORCE2 is not set
> # CONFIG_I2C_PARPORT is not set
> # CONFIG_I2C_PARPORT_LIGHT is not set
> -# CONFIG_I2C_PIIX4 is not set
> # CONFIG_I2C_PROSAVAGE is not set
> # CONFIG_I2C_SAVAGE4 is not set
> # CONFIG_SCx200_ACB is not set
> @@ -677,7 +689,9 @@ CONFIG_I2C_ALGOBIT=m
> # CONFIG_SENSORS_ASB100 is not set
> # CONFIG_SENSORS_DS1621 is not set
> # CONFIG_SENSORS_FSCHER is not set
> +# CONFIG_SENSORS_FSCPOS is not set
> # CONFIG_SENSORS_GL518SM is not set
> +# CONFIG_SENSORS_GL520SM is not set
> # CONFIG_SENSORS_IT87 is not set
> # CONFIG_SENSORS_LM63 is not set
> # CONFIG_SENSORS_LM75 is not set
> @@ -688,9 +702,11 @@ CONFIG_I2C_ALGOBIT=m
> # CONFIG_SENSORS_LM85 is not set
> # CONFIG_SENSORS_LM87 is not set
> # CONFIG_SENSORS_LM90 is not set
> +# CONFIG_SENSORS_LM92 is not set
> # CONFIG_SENSORS_MAX1619 is not set
> # CONFIG_SENSORS_PC87360 is not set
> # CONFIG_SENSORS_SMSC47B397 is not set
> +# CONFIG_SENSORS_SIS5595 is not set
> # CONFIG_SENSORS_SMSC47M1 is not set
> # CONFIG_SENSORS_VIA686A is not set
> # CONFIG_SENSORS_W83781D is not set
> @@ -700,10 +716,12 @@ CONFIG_I2C_ALGOBIT=m
> #
> # Other I2C Chip support
> #
> +# CONFIG_SENSORS_DS1337 is not set
> # CONFIG_SENSORS_EEPROM is not set
> # CONFIG_SENSORS_PCF8574 is not set
> # CONFIG_SENSORS_PCF8591 is not set
> # CONFIG_SENSORS_RTC8564 is not set
> +# CONFIG_SENSORS_M41T00 is not set
> # CONFIG_I2C_DEBUG_CORE is not set
> # CONFIG_I2C_DEBUG_ALGO is not set
> # CONFIG_I2C_DEBUG_BUS is not set
> @@ -732,7 +750,6 @@ CONFIG_I2C_ALGOBIT=m
> # Graphics support
> #
> # CONFIG_FB is not set
> -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
>
> #
> # Sound
> @@ -752,13 +769,9 @@ CONFIG_SOUND=m
> #
> # USB support
> #
> -# CONFIG_USB is not set
> CONFIG_USB_ARCH_HAS_HCD=y
> CONFIG_USB_ARCH_HAS_OHCI=y
> -
> -#
> -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be
> needed; see USB_STORAGE Help for more information
> -#
> +# CONFIG_USB is not set
>
> #
> # USB Gadget Support
> @@ -789,6 +802,10 @@ CONFIG_JBD_DEBUG=y
> CONFIG_FS_MBCACHE=y
> # CONFIG_REISERFS_FS is not set
> # CONFIG_JFS_FS is not set
> +
> +#
> +# XFS support
> +#
> # CONFIG_XFS_FS is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_ROMFS_FS is not set
> @@ -859,7 +876,6 @@ CONFIG_NFS_V3=y
> CONFIG_ROOT_NFS=y
> CONFIG_LOCKD=y
> CONFIG_LOCKD_V4=y
> -# CONFIG_EXPORTFS is not set
> CONFIG_SUNRPC=y
> # CONFIG_RPCSEC_GSS_KRB5 is not set
> # CONFIG_RPCSEC_GSS_SPKM3 is not set
> @@ -942,8 +958,10 @@ CONFIG_ZLIB_INFLATE=m
> #
> # Kernel hacking
> #
> +# CONFIG_PRINTK_TIME is not set
> CONFIG_DEBUG_KERNEL=y
> # CONFIG_MAGIC_SYSRQ is not set
> +CONFIG_LOG_BUF_SHIFT=14
> # CONFIG_SCHEDSTATS is not set
> # CONFIG_DEBUG_SLAB is not set
> # CONFIG_DEBUG_SPINLOCK is not set
> diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
> --- a/arch/ppc/kernel/Makefile
> +++ b/arch/ppc/kernel/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_POWER4) += cpu_setup_power
> obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o
> obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o
> obj-$(CONFIG_PCI) += pci.o
> +obj-$(CONFIG_RAPIDIO) += rio.o
> obj-$(CONFIG_KGDB) += ppc-stub.o
> obj-$(CONFIG_SMP) += smp.o smp-tbsync.o
> obj-$(CONFIG_TAU) += temp.o
> diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c
> new file mode 100644
> --- /dev/null
> +++ b/arch/ppc/kernel/rio.c
> @@ -0,0 +1,52 @@
> +/*
> + * RapidIO PPC32 support
> + *
> + * Copyright 2005 MontaVista Software, Inc.
> + * Matt Porter <mporter at kernel.crashing.org>
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as published
> by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/rio.h>
> +
> +#include <asm/rio.h>
> +
> +/**
> + * platform_rio_init - Do platform specific RIO init
> + *
> + * Any platform specific initialization of RapdIO
> + * hardware is done here as well as registration
> + * of any active master ports in the system.
> + */
> +void __attribute__ ((weak))
> + platform_rio_init(void)
> +{
> + printk(KERN_WARNING "RIO: No platform_rio_init() present\n");
> +}
> +
> +/**
> + * ppc_rio_init - Do PPC32 RIO init
> + *
> + * Calls platform-specific RIO init code and then calls
> + * rio_init_mports() to initialize any master ports that
> + * have been registered with the RIO subsystem.
> + */
> +static int __init ppc_rio_init(void)
> +{
> + printk(KERN_INFO "RIO: RapidIO init\n");
> +
> + /* Platform specific initialization */
> + platform_rio_init();
> +
> + /* Enumerate all registered ports */
> + rio_init_mports();
> +
> + return 0;
> +}
> +
> +subsys_initcall(ppc_rio_init);
> diff --git a/arch/ppc/platforms/85xx/stx_gp3.c
> b/arch/ppc/platforms/85xx/stx_gp3.c
> --- a/arch/ppc/platforms/85xx/stx_gp3.c
> +++ b/arch/ppc/platforms/85xx/stx_gp3.c
> @@ -38,6 +38,7 @@
> #include <linux/module.h>
> #include <linux/fsl_devices.h>
> #include <linux/interrupt.h>
> +#include <linux/rio.h>
>
> #include <asm/system.h>
> #include <asm/pgtable.h>
> @@ -59,6 +60,7 @@
>
> #include <syslib/cpm2_pic.h>
> #include <syslib/ppc85xx_common.h>
> +#include <syslib/ppc85xx_rio.h>
>
> extern void cpm2_reset(void);
>
> @@ -200,7 +202,6 @@ static struct irqaction cpm2_irqaction =
> static void __init
> gp3_init_IRQ(void)
> {
> - int i;
> bd_t *binfo = (bd_t *) __res;
>
> /*
> @@ -297,6 +298,18 @@ int mpc85xx_exclude_device(u_char bus, u
> }
> #endif /* CONFIG_PCI */
>
> +#ifdef CONFIG_RAPIDIO
> +void
> +platform_rio_init(void)
> +{
> + /*
> + * The STx firmware configures the RapidIO Local Access Window
> + * at 0xc0000000 with a size of 512MB.
> + */
> + mpc85xx_rio_setup(0xc0000000, 0x20000000);
> +}
> +#endif /* CONFIG_RAPIDIO */
> +
> void __init
> platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
> unsigned long r6, unsigned long r7)
> diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
> --- a/arch/ppc/syslib/Makefile
> +++ b/arch/ppc/syslib/Makefile
> @@ -101,6 +101,7 @@ obj-$(CONFIG_85xx) += open_pic.o ppc85x
> mpc85xx_devices.o
> ifeq ($(CONFIG_85xx),y)
> obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o
> +obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o
> endif
> obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \
> mpc83xx_sys.o mpc83xx_devices.o
> diff --git a/arch/ppc/syslib/ppc85xx_rio.c
> b/arch/ppc/syslib/ppc85xx_rio.c
> new file mode 100644
> --- /dev/null
> +++ b/arch/ppc/syslib/ppc85xx_rio.c
> @@ -0,0 +1,867 @@
> +/*
> + * MPC85xx RapidIO support
> + *
> + * Copyright 2005 MontaVista Software, Inc.
> + * Matt Porter <mporter at kernel.crashing.org>
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as published
> by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#include <linux/config.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/interrupt.h>
> +#include <linux/rio.h>
> +#include <linux/rio_drv.h>
> +
> +#include <asm/io.h>
> +
> +#define RIO_REGS_BASE (CCSRBAR + 0xc0000)
> +#define RIO_ATMU_REGS_OFFSET 0x10c00
> +#define RIO_MSG_REGS_OFFSET 0x11000
> +#define RIO_MAINT_WIN_SIZE 0x400000
> +#define RIO_DBELL_WIN_SIZE 0x1000
> +
> +#define RIO_MSG_OMR_MUI 0x00000002
> +#define RIO_MSG_OSR_TE 0x00000080
> +#define RIO_MSG_OSR_QOI 0x00000020
> +#define RIO_MSG_OSR_QFI 0x00000010
> +#define RIO_MSG_OSR_MUB 0x00000004
> +#define RIO_MSG_OSR_EOMI 0x00000002
> +#define RIO_MSG_OSR_QEI 0x00000001
> +
> +#define RIO_MSG_IMR_MI 0x00000002
> +#define RIO_MSG_ISR_TE 0x00000080
> +#define RIO_MSG_ISR_QFI 0x00000010
> +#define RIO_MSG_ISR_DIQI 0x00000001
> +
> +#define RIO_MSG_DESC_SIZE 32
> +#define RIO_MIN_TX_RING_SIZE 2
> +#define RIO_MAX_TX_RING_SIZE 2048
> +#define RIO_MIN_RX_RING_SIZE 2
> +#define RIO_MAX_RX_RING_SIZE 2048
> +
> +#define DOORBELL_DMR_DI 0x00000002
> +#define DOORBELL_DSR_TE 0x00000080
> +#define DOORBELL_DSR_QFI 0x00000010
> +#define DOORBELL_DSR_DIQI 0x00000001
> +#define DOORBELL_TID_OFFSET 0x03
> +#define DOORBELL_SID_OFFSET 0x05
> +#define DOORBELL_INFO_OFFSET 0x06
> +
> +#define DOORBELL_MESSAGE_SIZE 0x08
> +#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET))
> +#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET))
> +#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET))
> +
> +#define is_power_of_2(x) (((x) & ((x) - 1)) == 0)
> +
> +struct rio_atmu_regs {
> + u32 rowtar;
> + u32 pad1;
> + u32 rowbar;
> + u32 pad2;
> + u32 rowar;
> + u32 pad3[3];
> +};
> +
> +struct rio_msg_regs {
> + u32 omr;
> + u32 osr;
> + u32 pad1;
> + u32 odqdpar;
> + u32 pad2;
> + u32 osar;
> + u32 odpr;
> + u32 odatr;
> + u32 odcr;
> + u32 pad3;
> + u32 odqepar;
> + u32 pad4[13];
> + u32 imr;
> + u32 isr;
> + u32 pad5;
> + u32 ifqdpar;
> + u32 pad6;
> + u32 ifqepar;
> + u32 pad7[250];
> + u32 dmr;
> + u32 dsr;
> + u32 pad8;
> + u32 dqdpar;
> + u32 pad9;
> + u32 dqepar;
> + u32 pad10[26];
> + u32 pwmr;
> + u32 pwsr;
> + u32 pad11;
> + u32 pwqbar;
> +};
> +
> +struct rio_tx_desc {
> + u32 res1;
> + u32 saddr;
> + u32 dport;
> + u32 dattr;
> + u32 res2;
> + u32 res3;
> + u32 dwcnt;
> + u32 res4;
> +};
> +
> +static u32 regs_win;
> +static struct rio_atmu_regs *atmu_regs;
> +static struct rio_atmu_regs *maint_atmu_regs;
> +static struct rio_atmu_regs *dbell_atmu_regs;
> +static u32 dbell_win;
> +static u32 maint_win;
> +static struct rio_msg_regs *msg_regs;
> +
> +static struct rio_dbell_ring {
> + void *virt;
> + dma_addr_t phys;
> +} dbell_ring;
> +
> +static struct rio_msg_tx_ring {
> + void *virt;
> + dma_addr_t phys;
> + void *virt_buffer[RIO_MAX_TX_RING_SIZE];
> + dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE];
> + int tx_slot;
> + int size;
> +} msg_tx_ring;
> +
> +static struct rio_msg_rx_ring {
> + void *virt;
> + dma_addr_t phys;
> + void *virt_buffer[RIO_MAX_RX_RING_SIZE];
> + int rx_slot;
> + int size;
> +} msg_rx_ring;
> +
> +/**
> + * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message
> + * @index: ID of RapidIO interface
> + * @destid: Destination ID of target device
> + * @data: 16-bit info field of RapidIO doorbell message
> + *
> + * Sends a MPC85xx doorbell message. Returns %0 on success or
> + * %-EINVAL on failure.
> + */
> +static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data)
> +{
> + pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n",
> + index, destid, data);
> + out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22);
> + out_be16((void *)(dbell_win), data);
> +
> + return 0;
> +}
> +
> +/**
> + * mpc85xx_local_config_read - Generate a MPC85xx local config space
> read
> + * @index: ID of RapdiIO interface
> + * @offset: Offset into configuration space
> + * @len: Length (in bytes) of the maintenance transaction
> + * @data: Value to be read into
> + *
> + * Generates a MPC85xx local configuration space read. Returns %0 on
> + * success or %-EINVAL on failure.
> + */
> +static int mpc85xx_local_config_read(int index, u32 offset, int len,
> u32 * data)
> +{
> + pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index,
> + offset);
> + *data = in_be32((void *)(regs_win + offset));
> +
> + return 0;
> +}
> +
> +/**
> + * mpc85xx_local_config_write - Generate a MPC85xx local config space
> write
> + * @index: ID of RapdiIO interface
> + * @offset: Offset into configuration space
> + * @len: Length (in bytes) of the maintenance transaction
> + * @data: Value to be written
> + *
> + * Generates a MPC85xx local configuration space write. Returns %0 on
> + * success or %-EINVAL on failure.
> + */
> +static int mpc85xx_local_config_write(int index, u32 offset, int len,
> u32 data)
> +{
> + pr_debug
> + ("mpc85xx_local_config_write: index %d offset %8.8x data
> %8.8x\n",
> + index, offset, data);
> + out_be32((void *)(regs_win + offset), data);
> +
> + return 0;
> +}
> +
> +/**
> + * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance
> transaction
> + * @index: ID of RapdiIO interface
> + * @destid: Destination ID of transaction
> + * @hopcount: Number of hops to target device
> + * @offset: Offset into configuration space
> + * @len: Length (in bytes) of the maintenance transaction
> + * @val: Location to be read into
> + *
> + * Generates a MPC85xx read maintenance transaction. Returns %0 on
> + * success or %-EINVAL on failure.
> + */
> +static int
> +mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32
> offset, int len,
> + u32 * val)
> +{
> + u8 *data;
> +
> + pr_debug
> + ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset
> %8.8x len %d\n",
> + index, destid, hopcount, offset, len);
> + out_be32((void *)&maint_atmu_regs->rowtar,
> + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
> +
> + data = (u8 *) maint_win + offset;
> + switch (len) {
> + case 1:
> + *val = in_8((u8 *) data);
> + break;
> + case 2:
> + *val = in_be16((u16 *) data);
> + break;
> + default:
> + *val = in_be32((u32 *) data);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance
> transaction
> + * @index: ID of RapdiIO interface
> + * @destid: Destination ID of transaction
> + * @hopcount: Number of hops to target device
> + * @offset: Offset into configuration space
> + * @len: Length (in bytes) of the maintenance transaction
> + * @val: Value to be written
> + *
> + * Generates an MPC85xx write maintenance transaction. Returns %0 on
> + * success or %-EINVAL on failure.
> + */
> +static int
> +mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32
> offset,
> + int len, u32 val)
> +{
> + u8 *data;
> + pr_debug
> + ("mpc85xx_rio_config_write: index %d destid %d hopcount %d
> offset %8.8x len %d val %8.8x\n",
> + index, destid, hopcount, offset, len, val);
> + out_be32((void *)&maint_atmu_regs->rowtar,
> + (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9));
> +
> + data = (u8 *) maint_win + offset;
> + switch (len) {
> + case 1:
> + out_8((u8 *) data, val);
> + break;
> + case 2:
> + out_be16((u16 *) data, val);
> + break;
> + default:
> + out_be32((u32 *) data, val);
> + break;
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * rio_hw_add_outb_message - Add message to the MPC85xx outbound
> message queue
> + * @mport: Master port with outbound message queue
> + * @rdev: Target of outbound message
> + * @mbox: Outbound mailbox
> + * @buffer: Message to add to outbound queue
> + * @len: Length of message
> + *
> + * Adds the @buffer message to the MPC85xx outbound message queue.
> Returns
> + * %0 on success or %-EINVAL on failure.
> + */
> +int
> +rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev
> *rdev, int mbox,
> + void *buffer, size_t len)
> +{
> + u32 omr;
> + struct rio_tx_desc *desc =
> + (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot;
> + int ret = 0;
> +
> + pr_debug(KERN_INFO
> + "RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x
> len %8.8x\n",
> + rdev->destid, mbox, (int)buffer, len);
> +
> + if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) {
> + ret = -EINVAL;
> + goto out;
> + }
> +
> + /* Copy and clear rest of buffer */
> + memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len);
> + if (len < (RIO_MAX_MSG_SIZE - 4))
> + memset((void *)((u32) msg_tx_ring.
> + virt_buffer[msg_tx_ring.tx_slot] + len), 0,
> + RIO_MAX_MSG_SIZE - len);
> +
> + /* Set mbox field for message */
> + desc->dport = mbox & 0x3;
> +
> + /* Enable EOMI interrupt, set priority, and set destid */
> + desc->dattr = 0x28000000 | (rdev->destid << 2);
> +
> + /* Set transfer size aligned to next power of 2 (in double words) */
> + desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len);
> +
> + /* Set snooping and source buffer address */
> + desc->saddr = 0x00000004 |
> msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot];
> +
> + /* Increment enqueue pointer */
> + omr = in_be32((void *)&msg_regs->omr);
> + out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI);
> +
> + /* Go to next descriptor */
> + if (++msg_tx_ring.tx_slot == msg_tx_ring.size)
> + msg_tx_ring.tx_slot = 0;
> +
> + out:
> + return ret;
> +}
> +
> +EXPORT_SYMBOL_GPL(rio_hw_add_outb_message);
> +
> +/**
> + * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler
> + * @irq: Linux interrupt number
> + * @dev_instance: Pointer to interrupt-specific data
> + * @regs: Register context
> + *
> + * Handles outbound message interrupts. Executes a register outbound
> + * mailbox event handler and acks the interrupt occurence.
> + */
> +static irqreturn_t
> +mpc85xx_rio_tx_handler(int irq, void *dev_instance, struct pt_regs
> *regs)
> +{
> + int osr;
> + struct rio_mport *port = (struct rio_mport *)dev_instance;
> +
> + osr = in_be32((void *)&msg_regs->osr);
> +
> + if (osr & RIO_MSG_OSR_TE) {
> + printk(KERN_INFO "RIO: outbound message transmission error\n");
> + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE);
> + goto out;
> + }
> +
> + if (osr & RIO_MSG_OSR_QOI) {
> + printk(KERN_INFO "RIO: outbound message queue overflow\n");
> + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI);
> + goto out;
> + }
> +
> + if (osr & RIO_MSG_OSR_EOMI) {
> + u32 dqp = in_be32((void *)&msg_regs->odqdpar);
> + int slot = (dqp - msg_tx_ring.phys) >> 5;
> + port->outb_msg[0].mcback(port, -1, slot);
> +
> + /* Ack the end-of-message interrupt */
> + out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI);
> + }
> +
> + out:
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox
> + * @mport: Master port implementing the outbound message unit
> + * @mbox: Mailbox to open
> + * @entries: Number of entries in the outbound mailbox ring
> + *
> + * Initializes buffer ring, request the outbound message interrupt,
> + * and enables the outbound message unit. Returns %0 on success or
> + * %-EINVAL on failure.
> + */
> +int rio_open_outb_mbox(struct rio_mport *mport, int mbox, int entries)
> +{
> + int i, rc = 0;
> +
> + if ((entries < RIO_MIN_TX_RING_SIZE) ||
> + (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) {
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + /* Initialize shadow copy ring */
> + msg_tx_ring.size = entries;
> +
> + for (i = 0; i < msg_tx_ring.size; i++) {
> + msg_tx_ring.virt_buffer[i] =
> + (void *)__get_free_page(GFP_KERNEL);
> + msg_tx_ring.phys_buffer[i] =
> + (dma_addr_t) __pa(msg_tx_ring.virt_buffer[i]);
> + }
> +
> + /* Initialize outbound message descriptor ring */
> + msg_tx_ring.virt = dma_alloc_coherent(NULL,
> + msg_tx_ring.size *
> + RIO_MSG_DESC_SIZE,
> + &msg_tx_ring.phys, GFP_KERNEL);
> + memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE);
> + msg_tx_ring.tx_slot = 0;
> +
> + /* Point dequeue/enqueue pointers at first entry in ring */
> + out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys);
> + out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys);
> +
> + /* Configure for snooping */
> + out_be32((void *)&msg_regs->osar, 0x00000004);
> +
> + /* Clear interrupt status */
> + out_be32((void *)&msg_regs->osr, 0x000000b3);
> +
> + /* Hook up outbound message handler */
> + request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, "msg_tx",
> + (void *)mport);
> +
> + /*
> + * Configure outbound message unit
> + * Snooping
> + * Interrupts (all enabled, except QEIE)
> + * Chaining mode
> + * Disable
> + */
> + out_be32((void *)&msg_regs->omr, 0x00100220);
> +
> + /* Set number of entries */
> + out_be32((void *)&msg_regs->omr,
> + in_be32((void *)&msg_regs->omr) |
> + ((get_bitmask_order(entries) - 2) << 12));
> +
> + /* Now enable the unit */
> + out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) |
> 0x1);
> +
> + out:
> + return rc;
> +}
> +
> +/**
> + * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox
> + * @mport: Master port implementing the outbound message unit
> + * @mbox: Mailbox to close
> + *
> + * Disables the outbound message unit, free all buffers, and
> + * frees the outbound message interrupt.
> + */
> +void rio_close_outb_mbox(struct rio_mport *mport, int mbox)
> +{
> + /* Disable inbound message unit */
> + out_be32((void *)&msg_regs->omr, 0);
> +
> + /* Free ring */
> + dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE,
> + msg_tx_ring.virt, msg_tx_ring.phys);
> +
> + /* Free interrupt */
> + free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport);
> +}
> +
> +/**
> + * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler
> + * @irq: Linux interrupt number
> + * @dev_instance: Pointer to interrupt-specific data
> + * @regs: Register context
> + *
> + * Handles inbound message interrupts. Executes a registered inbound
> + * mailbox event handler and acks the interrupt occurence.
> + */
> +static irqreturn_t
> +mpc85xx_rio_rx_handler(int irq, void *dev_instance, struct pt_regs
> *regs)
> +{
> + int isr;
> + struct rio_mport *port = (struct rio_mport *)dev_instance;
> +
> + isr = in_be32((void *)&msg_regs->isr);
> +
> + if (isr & RIO_MSG_ISR_TE) {
> + printk(KERN_INFO "RIO: inbound message reception error\n");
> + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE);
> + goto out;
> + }
> +
> + /* XXX Need to check/dispatch until queue empty */
> + if (isr & RIO_MSG_ISR_DIQI) {
> + /*
> + * We implement *only* mailbox 0, but can receive messages
> + * for any mailbox/letter to that mailbox destination. So,
> + * make the callback with an unknown/invalid mailbox number
> + * argument.
> + */
> + port->inb_msg[0].mcback(port, -1, -1);
> +
> + /* Ack the queueing interrupt */
> + out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI);
> + }
> +
> + out:
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox
> + * @mport: Master port implementing the inbound message unit
> + * @mbox: Mailbox to open
> + * @entries: Number of entries in the inbound mailbox ring
> + *
> + * Initializes buffer ring, request the inbound message interrupt,
> + * and enables the inbound message unit. Returns %0 on success
> + * or %-EINVAL on failure.
> + */
> +int rio_open_inb_mbox(struct rio_mport *mport, int mbox, int entries)
> +{
> + int i, rc = 0;
> +
> + if ((entries < RIO_MIN_RX_RING_SIZE) ||
> + (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) {
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + /* Initialize client buffer ring */
> + msg_rx_ring.size = entries;
> + msg_rx_ring.rx_slot = 0;
> + for (i = 0; i < msg_rx_ring.size; i++)
> + msg_rx_ring.virt_buffer[i] = NULL;
> +
> + /* Initialize inbound message ring */
> + msg_rx_ring.virt = dma_alloc_coherent(NULL,
> + msg_rx_ring.size *
> + RIO_MAX_MSG_SIZE,
> + &msg_rx_ring.phys, GFP_KERNEL);
> +
> + /* Point dequeue/enqueue pointers at first entry in ring */
> + out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys);
> + out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys);
> +
> + /* Clear interrupt status */
> + out_be32((void *)&msg_regs->isr, 0x00000091);
> +
> + /* Hook up inbound message handler */
> + request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, "msg_rx",
> + (void *)mport);
> +
> + /*
> + * Configure inbound message unit:
> + * Snooping
> + * 4KB max message size
> + * Unmask all interrupt sources
> + * Disable
> + */
> + out_be32((void *)&msg_regs->imr, 0x001b0060);
> +
> + /* Set number of queue entries */
> + out_be32((void *)&msg_regs->imr,
> + in_be32((void *)&msg_regs->imr) |
> + ((get_bitmask_order(entries) - 2) << 12));
> +
> + /* Now enable the unit */
> + out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) |
> 0x1);
> +
> + out:
> + return rc;
> +}
> +
> +/**
> + * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox
> + * @mport: Master port implementing the inbound message unit
> + * @mbox: Mailbox to close
> + *
> + * Disables the inbound message unit, free all buffers, and
> + * frees the inbound message interrupt.
> + */
> +void rio_close_inb_mbox(struct rio_mport *mport, int mbox)
> +{
> + /* Disable inbound message unit */
> + out_be32((void *)&msg_regs->imr, 0);
> +
> + /* Free ring */
> + dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE,
> + msg_rx_ring.virt, msg_rx_ring.phys);
> +
> + /* Free interrupt */
> + free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport);
> +}
> +
> +/**
> + * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message
> queue
> + * @mport: Master port implementing the inbound message unit
> + * @mbox: Inbound mailbox number
> + * @buf: Buffer to add to inbound queue
> + *
> + * Adds the @buf buffer to the MPC85xx inbound message queue. Returns
> + * %0 on success or %-EINVAL on failure.
> + */
> +int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void
> *buf)
> +{
> + int rc = 0;
> +
> + pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n",
> + msg_rx_ring.rx_slot);
> +
> + if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) {
> + printk(KERN_ERR
> + "RIO: error adding inbound buffer %d, buffer exists\n",
> + msg_rx_ring.rx_slot);
> + rc = -EINVAL;
> + goto out;
> + }
> +
> + msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf;
> + if (++msg_rx_ring.rx_slot == msg_rx_ring.size)
> + msg_rx_ring.rx_slot = 0;
> +
> + out:
> + return rc;
> +}
> +
> +EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer);
> +
> +/**
> + * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx
> message unit
> + * @mport: Master port implementing the inbound message unit
> + * @mbox: Inbound mailbox number
> + *
> + * Gets the next available inbound message from the inbound message
> queue.
> + * A pointer to the message is returned on success or NULL on failure.
> + */
> +void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox)
> +{
> + u32 imr;
> + u32 phys_buf, virt_buf;
> + void *buf = NULL;
> + int buf_idx;
> +
> + phys_buf = in_be32((void *)&msg_regs->ifqdpar);
> +
> + /* If no more messages, then bail out */
> + if (phys_buf == in_be32((void *)&msg_regs->ifqepar))
> + goto out2;
> +
> + virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys);
> + buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE;
> + buf = msg_rx_ring.virt_buffer[buf_idx];
> +
> + if (!buf) {
> + pr_debug(KERN_ERR
> + "RIO: inbound message copy failed, no buffers\n");
> + goto out1;
> + }
> +
> + /* Copy max message size, caller is expected to allocate that big */
> + memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE);
> +
> + /* Clear the available buffer */
> + msg_rx_ring.virt_buffer[buf_idx] = NULL;
> +
> + out1:
> + imr = in_be32((void *)&msg_regs->imr);
> + out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI);
> +
> + out2:
> + return buf;
> +}
> +
> +EXPORT_SYMBOL_GPL(rio_hw_get_inb_message);
> +
> +/**
> + * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler
> + * @irq: Linux interrupt number
> + * @dev_instance: Pointer to interrupt-specific data
> + * @regs: Register context
> + *
> + * Handles doorbell interrupts. Parses a list of registered
> + * doorbell event handlers and executes a matching event handler.
> + */
> +static irqreturn_t
> +mpc85xx_rio_dbell_handler(int irq, void *dev_instance, struct pt_regs
> *regs)
> +{
> + int dsr;
> + struct rio_mport *port = (struct rio_mport *)dev_instance;
> +
> + dsr = in_be32((void *)&msg_regs->dsr);
> +
> + if (dsr & DOORBELL_DSR_TE) {
> + printk(KERN_INFO "RIO: doorbell reception error\n");
> + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE);
> + goto out;
> + }
> +
> + if (dsr & DOORBELL_DSR_QFI) {
> + printk(KERN_INFO "RIO: doorbell queue full\n");
> + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI);
> + goto out;
> + }
> +
> + /* XXX Need to check/dispatch until queue empty */
> + if (dsr & DOORBELL_DSR_DIQI) {
> + u32 dmsg =
> + (u32) dbell_ring.virt +
> + (in_be32((void *)&msg_regs->dqdpar) & 0xfff);
> + u32 dmr;
> + struct rio_dbell *dbell;
> + int found = 0;
> +
> + pr_debug(KERN_INFO
> + "RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n",
> + DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg));
> +
> + list_for_each_entry(dbell, &port->dbells, node) {
> + if ((dbell->res->start <= DBELL_INF(dmsg)) &&
> + (dbell->res->end >= DBELL_INF(dmsg))) {
> + found = 1;
> + break;
> + }
> + }
> + if (found) {
> + dbell->dinb(port, DBELL_SID(dmsg), DBELL_TID(dmsg),
> + DBELL_INF(dmsg));
> + } else {
> + pr_debug(KERN_INFO
> + "RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n",
> + DBELL_SID(dmsg), DBELL_TID(dmsg),
> + DBELL_INF(dmsg));
> + }
> + dmr = in_be32((void *)&msg_regs->dmr);
> + out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI);
> + out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI);
> + }
> +
> + out:
> + return IRQ_HANDLED;
> +}
> +
> +/**
> + * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init
> + * @mport: Master port implementing the inbound doorbell unit
> + *
> + * Initializes doorbell unit hardware and inbound DMA buffer
> + * ring. Called from mpc85xx_rio_setup().
> + */
> +static void mpc85xx_rio_doorbell_init(struct rio_mport *mport)
> +{
> + /* Map outbound doorbell window immediately after maintenance window
> */
> + dbell_win =
> + (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE,
> + RIO_DBELL_WIN_SIZE);
> +
> + /* Initialize inbound doorbells */
> + dbell_ring.virt = dma_alloc_coherent(NULL,
> + 512 * DOORBELL_MESSAGE_SIZE,
> + &dbell_ring.phys, GFP_KERNEL);
> +
> + /* Point dequeue/enqueue pointers at first entry in ring */
> + out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys);
> + out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys);
> +
> + /* Clear interrupt status */
> + out_be32((void *)&msg_regs->dsr, 0x00000091);
> +
> + /* Hook up doorbell handler */
> + request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0,
> + "dbell_rx", (void *)mport);
> +
> + /* Configure doorbells for snooping, 512 entries, and enable */
> + out_be32((void *)&msg_regs->dmr, 0x00108161);
> +}
> +
> +static char *cmdline = NULL;
> +
> +static int mpc85xx_rio_get_hdid(int index)
> +{
> + /* XXX Need to parse multiple entries in some format */
> + if (!cmdline)
> + return -1;
> +
> + return simple_strtol(cmdline, NULL, 0);
> +}
> +
> +static int mpc85xx_rio_get_cmdline(char *s)
> +{
> + if (!s)
> + return 0;
> +
> + cmdline = s;
> + return 1;
> +}
> +
> +__setup("riohdid=", mpc85xx_rio_get_cmdline);
> +
> +/**
> + * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface
> + * @law_start: Starting physical address of RapidIO LAW
> + * @law_size: Size of RapidIO LAW
> + *
> + * Initializes MPC85xx RapidIO hardware interface, configures
> + * master port with system-specific info, and registers the
> + * master port with the RapidIO subsystem.
> + */
> +void mpc85xx_rio_setup(int law_start, int law_size)
> +{
> + struct rio_ops *ops;
> + struct rio_mport *port;
> +
> + ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL);
> + ops->lcread = mpc85xx_local_config_read;
> + ops->lcwrite = mpc85xx_local_config_write;
> + ops->cread = mpc85xx_rio_config_read;
> + ops->cwrite = mpc85xx_rio_config_write;
> + ops->dsend = mpc85xx_rio_doorbell_send;
> +
> + port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL);
> + port->id = 0;
> + port->index = 0;
> + INIT_LIST_HEAD(&port->dbells);
> + port->iores.start = law_start;
> + port->iores.end = law_start + law_size;
> + port->iores.flags = IORESOURCE_MEM;
> +
> + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff);
> + rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0);
> + rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
> + strcpy(port->name, "RIO0 mport");
> +
> + port->ops = ops;
> + port->host_deviceid = mpc85xx_rio_get_hdid(port->id);
> +
> + rio_register_mport(port);
> +
> + regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000);
> + atmu_regs = (struct rio_atmu_regs *)(regs_win +
> RIO_ATMU_REGS_OFFSET);
> + maint_atmu_regs = atmu_regs + 1;
> + dbell_atmu_regs = atmu_regs + 2;
> + msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET);
> +
> + /* Configure maintenance transaction window */
> + out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000);
> + out_be32((void *)&maint_atmu_regs->rowar, 0x80077015);
> +
> + maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE);
> +
> + /* Configure outbound doorbell window */
> + out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400);
> + out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b);
> + mpc85xx_rio_doorbell_init(port);
> +}
> diff --git a/arch/ppc/syslib/ppc85xx_rio.h
> b/arch/ppc/syslib/ppc85xx_rio.h
> new file mode 100644
> --- /dev/null
> +++ b/arch/ppc/syslib/ppc85xx_rio.h
> @@ -0,0 +1,21 @@
> +/*
> + * MPC85xx RapidIO definitions
> + *
> + * Copyright 2005 MontaVista Software, Inc.
> + * Matt Porter <mporter at kernel.crashing.org>
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as published
> by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#ifndef __PPC_SYSLIB_PPC85XX_RIO_H
> +#define __PPC_SYSLIB_PPC85XX_RIO_H
> +
> +#include <linux/config.h>
> +#include <linux/init.h>
> +
> +extern void mpc85xx_rio_setup(int law_start, int law_size);
> +
> +#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */
> diff --git a/include/asm-ppc/rio.h b/include/asm-ppc/rio.h
> new file mode 100644
> --- /dev/null
> +++ b/include/asm-ppc/rio.h
> @@ -0,0 +1,18 @@
> +/*
> + * RapidIO architecture support
> + *
> + * Copyright 2005 MontaVista Software, Inc.
> + * Matt Porter <mporter at kernel.crashing.org>
> + *
> + * This program is free software; you can redistribute it and/or
> modify it
> + * under the terms of the GNU General Public License as published
> by the
> + * Free Software Foundation; either version 2 of the License, or
> (at your
> + * option) any later version.
> + */
> +
> +#ifndef ASM_PPC_RIO_H
> +#define ASM_PPC_RIO_H
> +
> +extern void platform_rio_init(void);
> +
> +#endif /* ASM_PPC_RIO_H */
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
More information about the Linuxppc-embedded
mailing list