Getting a kernel to run on AMCC 440EP (Bamboo)

[Eugene Surovegin]

On Mon, Jul 25, 2005 at 06:50:17PM +0200, Frank Lautenbach wrote:
> Hi folks,
> 
> I want to bring up a linux kernel on the AMCC 440EP board (Bamboo). 
> (still!  ;-) )
> 
> I managed to compile the kernel sources from kernel.org (2.6.12.3) with 
> a cross tool chain created with
> this great script from kegel.com (using demo-ppc440.sh). I set ARCH=ppc 
> and CROSS_COMPILE=powerpc-440-linux-gnu-
> during the configuration procedure (using xconfig) as well as for the 
> actual buil process. Of course, I also
> added the path to the ppc-crosstools to my PATH variable. Seems I did 
> all that right, because the build process succeeded.
> 
> Finally I got an zImage.elf file (among some other variants) after the 
> make process in .../arch/ppc/boot/images which I tried to load
> via TFTP of the PIBS ROM Monitor. After the image has been loaded into 
> RAM I get
> a lapidar "error: can not process ELF program header, status: command 
> rc=-1" and that's it...
> 
> When I examine the image file with readelf everything seems to be all 
> right. All data seems to be plausible
> and it is in fact a binary for PPC.
> 
> Anyhow seems to be wrong with the header format... Has anyone a guess 
> what's the problem? Is PIBS
> not able to load kernel images at all? Or do I have to create another 
> kind of image format?
> 

Try PIBS specific image (made with mktree). This image has 'RPO' 
letters at the beginning.

-- 
Eugene