LITE5200 2.6.x kernel support

[Andrey Volkov]

Oliver,

Could you send boot log?
And, at this time, vanilla 2.6.xx kernel couldn't boot from nfs (and use
eth too), since fec (ethernet) driver still not ready.

-- 
Regards
Andrey Volkov

Olivier Singla wrote:
> Hi,
> 
> I am currently using 2.4.25 on the Lite5200 board, but I'd really like to
> switch to 2.6.x. The only 5200 specific support I need are the integrated
> uart and the PCI. I tried both 2.6.11 and 2.6.12 without luck: the kernel
> start, but then is stuck (seems into the init sequence). I use the
> configuration
> file from arch/ppc/configs/lite5200_defconfig. I cross-compiled the
> kernel with gcc-3.4.1.
> 
> I was wondering if somebody could give me some help, maybe by telling
> be what I am doing wrong.
> 
> Thanks,
> Olivier
> 
> BTW, I tried also 2.6.13-rc3, but I can't even compile for the Lite5200,
> there are some syntax error when compile the pci module...
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>