8272ADS and Linux 2.6.12

[Allen Curtis]

> => setenv bootargs console=ttyCPM0,115200  root=/dev/ram
> => bootm fe600000
> ## Booting image at fe600000 ...
>    Image Name:   2.6.12 for 8272
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    875845 Bytes = 855.3 kB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
>

Can you provide your kernel configuration information regarding the 
serial ports. Which serial port is your console port? Check the 
following configuration options:
   CONFIG_SERIAL_CONSOLE
   CONFIG_SCC_CONSOLE
   CONFIG_SERIAL_CORE
   CONFIG_SERIAL_CORE_CONSOLE

Another observation is that you are trying to boot with a RAM disk but 
you have not provided the RAM disk address to the bootm command. This 
is not your current problem since you don't get that far.

- Allen