Stuck in booting 2.6.10-ac11 on Memec Design FF1152...

[Andrei Konovalov]

Finn S. Nielsen wrote:
> Hi Jakob,
> 
> I noticed on the embedded powerpc mailing list, that you are working w. linux on the Memec V2P20 FF1152 board.
> I have one too and I'm given the task to get a linux up and running on it...
> 
> What kernel version are you using and where did you get the source ?.
> It seems to me that in the official source tree, there is only support
> for the Xilinx ML300 board - or am I missing something?

If you are speaking about 2.6 then you aren't missing anything.

> Montavista and  MIND systems say they have a port for the memec board, but if an open

MontaVista's code for memec is in linuxppc-2.4 tree.
http://ppc.bkbits.net:8080/linuxppc-2.4/cset@1.1282

We've used 2VP7-FG456 board with the P160 COMM module.


Best rewgards,
Andrei

> source port exists, I'd prefer that.
> 
> Best regards,
> 
> Finn S. Nielsen
> IO Technologies a/s
> Carl Jacobsens Vej 16, opg. 6, 3 sal
> 2500 Valby
> Denmark
> Tlp (direct): +45 36188109
> Fax:. +45 36188101
> Check out our new website: http://www.iotech.dk
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded