Xilinx_uartlite

Jaap de Jong jaap.dejong at nedap.com
Thu Dec 1 18:13:11 EST 2005


Hi Tom,

Thanks for your reply, but then I only get:
	Now booting the kernel

Beste regards,

Jaap

-----Oorspronkelijk bericht-----
Van: T Ziomek [mailto:ctz001 at email.mot.com] 
Verzonden: donderdag 1 december 2005 02:06
Aan: Jaap de Jong; linuxppc-embedded
Onderwerp: Re: Xilinx_uartlite

> I'm trying to get my avnet virtex4fx12 running with linux.
> It boots, but ends with:
>         Warning: unable to open an initial console.
> This means /dev/console was not opened; init is running.
> Since my board has no 16550 uart I must use xilinx_uartlite Part of my

> configuration:
>         +--Character devices
>                 +--Xilinx UART Lite                     ON
>                 +--Console on UART Lite port            ON
> Any ideas?

/dev/console may not be tied to your UARTLite.  If you don't specify the
console on your kernel command line, try adding something along the
lines of "console=ttyS0,19200" to it (with the appropriate device and
baud rate of course).

Tom
-- 
   /"\  ASCII Ribbon Campaign   |
   \ /                          |   Email to user 'CTZ001'
    X        Against HTML       |             at 'email.mot.com'
   / \     in e-mail & news     |





More information about the Linuxppc-embedded mailing list