[PATCH] ppc32 :Added PCI support for MPC83xx
Li Tony-r64360
Tony.Li at freescale.com
Tue Aug 30 18:55:26 EST 2005
MPC83xx cpu has two PCI buses. This patch adds support for them.
After system boot. The code initializes PCI inbound/outbound
windows, allocate and register PCI memory/io space. Be aware
that this patch depand on the firmware.
Signed-off-by: Tony Li <tony.li at freescale.com <mailto:tony.li at freescale.com> >
---
author Tony Li <tony.li at freescale.com <mailto:tony.li at freescale.com> > Tue, 30 Aug 2005
committer Tony Li <tony.li at freescale.com <mailto:tony.li at freescale.com> > Tue, 30 Aug 2005
diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/Kconfig linux-2.6.13-rc6-pci/arch/ppc/Kconfig
--- linux-2.6.13-rc6/arch/ppc/Kconfig 2005-08-09 18:00:47.000000000 +0800
+++ linux-2.6.13-rc6-pci/arch/ppc/Kconfig 2005-08-19 18:17:27.000000000 +0800
@@ -712,6 +712,11 @@
bool "Freescale MPC834x SYS"
help
This option enables support for the MPC 834x SYS evaluation board.
+ Be aware that PCI buses can only function when SYS board is plugged on
+ PIB (Platform IO Board) board from Freescale which provide 3 PCI slots.
+ Just like PC,the board level initalization is bootloader`s responsiblilty.
+ The PCI deponds on bootloader configurate board corretly. Refer to Freescale
+ to get more information about this.
endchoice
@@ -1191,6 +1196,10 @@
bool
default PCI
+config MPC834x_PCI2
+ bool
+ default y if PCI && MPC834x_SYS
+
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.c linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.c
--- linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.c 2005-08-09 18:00:47.000000000 +0800
+++ linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.c 2005-08-30 16:38:52.000000000 +0800
@@ -62,9 +62,28 @@
unsigned char __res[sizeof (bd_t)];
#ifdef CONFIG_PCI
-#error "PCI is not supported"
-/* NEED mpc83xx_map_irq & mpc83xx_exclude_device
- see platforms/85xx/mpc85xx_ads_common.c */
+int
+mpc83xx_ads_map_irq(struct pci_dev *dev,unsigned char idsel,unsigned char pin)
+{
+ char pci_irq_table[][4]=
+ /*
+ * PCI IDSEL&INTPIN -> INTLINE
+ * INTA INTB INTC INTD
+ */
+ {
+ {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */
+ {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */
+ {PIRQD, PIRQA, PIRQB, PIRQC} /* idsel 0x13 */
+ };
+ /* MPC8349 MDS board specific */
+ const long min_idsel=0x11,max_idsel=0x13,irqs_per_slot=4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+int
+mpc83xx_ads_exclude_device(u_char bus, u_char devfn)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
#endif /* CONFIG_PCI */
/* ************************************************************************
@@ -88,7 +107,7 @@
#ifdef CONFIG_PCI
/* setup PCI host bridges */
- mpc83xx_sys_setup_hose();
+ mpc83xx_setup_hose();
#endif
mpc83xx_early_serial_map();
@@ -175,10 +194,10 @@
IRQ_SENSE_LEVEL, /* EXT 1 */
IRQ_SENSE_LEVEL, /* EXT 2 */
0, /* EXT 3 */
- 0, /* EXT 4 */
- 0, /* EXT 5 */
- 0, /* EXT 6 */
- 0, /* EXT 7 */
+ IRQ_SENSE_LEVEL, /* EXT 4 */
+ IRQ_SENSE_LEVEL, /* EXT 5 */
+ IRQ_SENSE_LEVEL, /* EXT 6 */
+ IRQ_SENSE_LEVEL, /* EXT 7 */
};
ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8);
diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.h linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.h
--- linux-2.6.13-rc6/arch/ppc/platforms/83xx/mpc834x_sys.h 2005-06-18 03:48:29.000000000 +0800
+++ linux-2.6.13-rc6-pci/arch/ppc/platforms/83xx/mpc834x_sys.h 2005-08-23 10:00:08.000000000 +0800
@@ -26,7 +26,7 @@
#define VIRT_IMMRBAR ((uint)0xfe000000)
#define BCSR_PHYS_ADDR ((uint)0xf8000000)
-#define BCSR_SIZE ((uint)(32 * 1024))
+#define BCSR_SIZE ((uint)(128 * 1024))
#define BCSR_MISC_REG2_OFF 0x07
#define BCSR_MISC_REG2_PORESET 0x01
@@ -35,22 +35,34 @@
#define BCSR_MISC_REG3_CNFLOCK 0x80
#ifdef CONFIG_PCI
-/* PCI interrupt controller */
-#define PIRQA MPC83xx_IRQ_IRQ4
-#define PIRQB MPC83xx_IRQ_IRQ5
-#define PIRQC MPC83xx_IRQ_IRQ6
-#define PIRQD MPC83xx_IRQ_IRQ7
-
-#define MPC834x_SYS_PCI1_LOWER_IO 0x00000000
-#define MPC834x_SYS_PCI1_UPPER_IO 0x00ffffff
-#define MPC834x_SYS_PCI1_LOWER_MEM 0x80000000
-#define MPC834x_SYS_PCI1_UPPER_MEM 0x9fffffff
+#define PCI1_CFG_ADDR_OFFSET (0x8300)
+#define PCI1_CFG_DATA_OFFSET (0x8304)
-#define MPC834x_SYS_PCI1_IO_BASE 0xe2000000
-#define MPC834x_SYS_PCI1_MEM_OFFSET 0x00000000
+#define PCI2_CFG_ADDR_OFFSET (0x8380)
+#define PCI2_CFG_DATA_OFFSET (0x8384)
+
+#define PIRQA MPC83xx_IRQ_EXT4
+#define PIRQB MPC83xx_IRQ_EXT5
+#define PIRQC MPC83xx_IRQ_EXT6
+#define PIRQD MPC83xx_IRQ_EXT7
+
+#define MPC83xx_PCI1_LOWER_IO 0x00000000
+#define MPC83xx_PCI1_UPPER_IO 0x00ffffff
+#define MPC83xx_PCI1_LOWER_MEM 0x80000000
+#define MPC83xx_PCI1_UPPER_MEM 0x9fffffff
+#define MPC83xx_PCI1_IO_BASE 0xe2000000
+#define MPC83xx_PCI1_MEM_OFFSET 0x00000000
+#define MPC83xx_PCI1_IO_SIZE 0x01000000
+
+#define MPC83xx_PCI2_LOWER_IO 0x00000000
+#define MPC83xx_PCI2_UPPER_IO 0x00ffffff
+#define MPC83xx_PCI2_LOWER_MEM 0xa0000000
+#define MPC83xx_PCI2_UPPER_MEM 0xbfffffff
+#define MPC83xx_PCI2_IO_BASE 0xe3000000
+#define MPC83xx_PCI2_MEM_OFFSET 0x00000000
+#define MPC83xx_PCI2_IO_SIZE 0x01000000
-#define MPC834x_SYS_PCI1_IO_SIZE 0x01000000
#endif /* CONFIG_PCI */
#endif /* __MACH_MPC83XX_SYS_H__ */
diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/syslib/ppc834x_pci.h linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc834x_pci.h
--- linux-2.6.13-rc6/arch/ppc/syslib/ppc834x_pci.h 1970-01-01 08:30:00.000000000 +0830
+++ linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc834x_pci.h 2005-08-19 18:30:11.000000000 +0800
@@ -0,0 +1,161 @@
+/* Created by Tony Li <tony.li at freescale.com <mailto:tony.li at freescale.com> > 2005.6
+ * Copyright (c) 2005 freescale semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __MPC834X_PCI_H__
+#define __MPC834X_PCI_H__
+
+typedef struct immr_clk {
+ u32 spmr; /* system PLL mode Register */
+ u32 occr; /* output clock control Register */
+ u32 sccr; /* system clock control Register */
+ u8 res0[0xF4];
+} immr_clk_t;
+
+/*
+ * PCI Software Configuration Registers
+ */
+typedef struct immr_pciconf {
+ u32 config_address;
+ u32 config_data;
+ u32 int_ack;
+ u8 res[116];
+} immr_pciconf_t;
+
+/*
+ * Sequencer
+ */
+typedef struct immr_ios {
+ u32 potar0;
+ u8 res0[4];
+ u32 pobar0;
+ u8 res1[4];
+ u32 pocmr0;
+ u8 res2[4];
+ u32 potar1;
+ u8 res3[4];
+ u32 pobar1;
+ u8 res4[4];
+ u32 pocmr1;
+ u8 res5[4];
+ u32 potar2;
+ u8 res6[4];
+ u32 pobar2;
+ u8 res7[4];
+ u32 pocmr2;
+ u8 res8[4];
+ u32 potar3;
+ u8 res9[4];
+ u32 pobar3;
+ u8 res10[4];
+ u32 pocmr3;
+ u8 res11[4];
+ u32 potar4;
+ u8 res12[4];
+ u32 pobar4;
+ u8 res13[4];
+ u32 pocmr4;
+ u8 res14[4];
+ u32 potar5;
+ u8 res15[4];
+ u32 pobar5;
+ u8 res16[4];
+ u32 pocmr5;
+ u8 res17[4];
+ u8 res18[0x60];
+ u32 pmcr;
+ u8 res19[4];
+ u32 dtcr;
+ u8 res20[4];
+} immr_ios_t;
+#define POTAR_TA_MASK 0x000fffff
+#define POBAR_BA_MASK 0x000fffff
+#define POCMR_EN 0x80000000
+#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */
+#define POCMR_SE 0x20000000 /* streaming enable */
+#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */
+#define POCMR_CM_MASK 0x000fffff
+
+/*
+ * PCI Controller Control and Status Registers
+ */
+typedef struct immr_pcictrl {
+ u32 esr;
+ u32 ecdr;
+ u32 eer;
+ u32 eatcr;
+ u32 eacr;
+ u32 eeacr;
+ u32 edlcr;
+ u32 edhcr;
+ u32 gcr;
+ u32 ecr;
+ u32 gsr;
+ u8 res0[12];
+ u32 pitar2;
+ u8 res1[4];
+ u32 pibar2;
+ u32 piebar2;
+ u32 piwar2;
+ u8 res2[4];
+ u32 pitar1;
+ u8 res3[4];
+ u32 pibar1;
+ u32 piebar1;
+ u32 piwar1;
+ u8 res4[4];
+ u32 pitar0;
+ u8 res5[4];
+ u32 pibar0;
+ u8 res6[4];
+ u32 piwar0;
+ u8 res7[132];
+} immr_pcictrl_t;
+#define PITAR_TA_MASK 0x000fffff
+#define PIBAR_MASK 0xffffffff
+#define PIEBAR_EBA_MASK 0x000fffff
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_RTT_MASK 0x000f0000
+#define PIWAR_RTT_NO_SNOOP 0x00040000
+#define PIWAR_RTT_SNOOP 0x00050000
+#define PIWAR_WTT_MASK 0x0000f000
+#define PIWAR_WTT_NO_SNOOP 0x00004000
+#define PIWAR_WTT_SNOOP 0x00005000
+#define PIWAR_IWS_MASK 0x0000003F
+#define PIWAR_IWS_4K 0x0000000B
+#define PIWAR_IWS_8K 0x0000000C
+#define PIWAR_IWS_16K 0x0000000D
+#define PIWAR_IWS_32K 0x0000000E
+#define PIWAR_IWS_64K 0x0000000F
+#define PIWAR_IWS_128K 0x00000010
+#define PIWAR_IWS_256K 0x00000011
+#define PIWAR_IWS_512K 0x00000012
+#define PIWAR_IWS_1M 0x00000013
+#define PIWAR_IWS_2M 0x00000014
+#define PIWAR_IWS_4M 0x00000015
+#define PIWAR_IWS_8M 0x00000016
+#define PIWAR_IWS_16M 0x00000017
+#define PIWAR_IWS_32M 0x00000018
+#define PIWAR_IWS_64M 0x00000019
+#define PIWAR_IWS_128M 0x0000001A
+#define PIWAR_IWS_256M 0x0000001B
+#define PIWAR_IWS_512M 0x0000001C
+#define PIWAR_IWS_1G 0x0000001D
+#define PIWAR_IWS_2G 0x0000001E
+
+#endif /*__MPC834X_PCI_H__*/
diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.c linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.c
--- linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.c 2005-08-09 18:00:47.000000000 +0800
+++ linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.c 2005-08-23 10:18:04.000000000 +0800
@@ -11,6 +11,20 @@
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * July 2005, Tony Li<tony.li at freescale.com <mailto:tony.li at freescale.com> >
+ * Added PCI support
+ * PCI can be enabled only if MPC834x SYS board combined with PIB(Platform
+ * IO Board) board in which three physical PCI slots locate.
*/
#include <linux/config.h>
@@ -19,7 +33,7 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/serial.h>
-#include <linux/tty.h> /* for linux/serial_core.h */
+#include <linux/tty.h> /* for linux/serial_core.h */
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
@@ -31,27 +45,29 @@
#include <asm/delay.h>
#include <syslib/ppc83xx_setup.h>
+#if defined(CONFIG_PCI)
+#include <asm/delay.h>
+#include <syslib/ppc834x_pci.h>
+#endif
phys_addr_t immrbar;
/* Return the amount of memory */
-unsigned long __init
-mpc83xx_find_end_of_memory(void)
+unsigned long __init mpc83xx_find_end_of_memory(void)
{
- bd_t *binfo;
+ bd_t *binfo;
- binfo = (bd_t *) __res;
+ binfo = (bd_t *) __res;
- return binfo->bi_memsize;
+ return binfo->bi_memsize;
}
-long __init
-mpc83xx_time_init(void)
+long __init mpc83xx_time_init(void)
{
#define SPCR_OFFS 0x00000110
#define SPCR_TBEN 0x00400000
- bd_t *binfo = (bd_t *)__res;
+ bd_t *binfo = (bd_t *) __res;
u32 *spcr = ioremap(binfo->bi_immr_base + SPCR_OFFS, 4);
*spcr |= SPCR_TBEN;
@@ -62,11 +78,10 @@
}
/* The decrementer counts at the system (internal) clock freq divided by 4 */
-void __init
-mpc83xx_calibrate_decr(void)
+void __init mpc83xx_calibrate_decr(void)
{
- bd_t *binfo = (bd_t *) __res;
- unsigned int freq, divisor;
+ bd_t *binfo = (bd_t *) __res;
+ unsigned int freq, divisor;
freq = binfo->bi_busfreq;
divisor = 4;
@@ -75,15 +90,14 @@
}
#ifdef CONFIG_SERIAL_8250
-void __init
-mpc83xx_early_serial_map(void)
+void __init mpc83xx_early_serial_map(void)
{
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
struct uart_port serial_req;
#endif
struct plat_serial8250_port *pdata;
bd_t *binfo = (bd_t *) __res;
- pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC83xx_DUART);
+ pdata = (struct plat_serial8250_port *)ppc_sys_get_pdata(MPC83xx_DUART);
/* Setup serial port access */
pdata[0].uartclk = binfo->bi_busfreq;
@@ -91,7 +105,7 @@
pdata[0].membase = ioremap(pdata[0].mapbase, 0x100);
#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB)
- memset(&serial_req, 0, sizeof (serial_req));
+ memset(&serial_req, 0, sizeof(serial_req));
serial_req.iotype = SERIAL_IO_MEM;
serial_req.mapbase = pdata[0].mapbase;
serial_req.membase = pdata[0].membase;
@@ -114,8 +128,7 @@
}
#endif
-void
-mpc83xx_restart(char *cmd)
+void mpc83xx_restart(char *cmd)
{
volatile unsigned char __iomem *reg;
unsigned char tmp;
@@ -129,7 +142,7 @@
* Otherwise the reset asserts but doesn't clear.
*/
tmp = in_8(reg + BCSR_MISC_REG3_OFF);
- tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
+ tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
out_8(reg + BCSR_MISC_REG3_OFF, tmp);
/*
@@ -145,21 +158,252 @@
tmp |= BCSR_MISC_REG2_PORESET;
out_8(reg + BCSR_MISC_REG2_OFF, tmp);
- for(;;);
+ for (;;) ;
}
-void
-mpc83xx_power_off(void)
+void mpc83xx_power_off(void)
{
local_irq_disable();
- for(;;);
+ for (;;) ;
}
-void
-mpc83xx_halt(void)
+void mpc83xx_halt(void)
{
local_irq_disable();
- for(;;);
+ for (;;) ;
+}
+
+#if defined(CONFIG_PCI)
+void __init mpc83xx_setup_pci1(struct pci_controller *hose)
+{
+ unsigned short reg16;
+ volatile immr_pcictrl_t *pci_ctrl;
+ volatile immr_ios_t *ios;
+ bd_t *binfo = (bd_t *) __res;
+
+ pci_ctrl = ioremap(binfo->bi_immr_base + 0x8500,
+ sizeof(immr_pcictrl_t));
+ ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t));
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+ ios->potar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POTAR_TA_MASK;
+ ios->pobar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POBAR_BA_MASK;
+ ios->pocmr0 = POCMR_EN |
+ (((~0UL -
+ (MPC83xx_PCI1_UPPER_MEM -
+ MPC83xx_PCI1_LOWER_MEM)) >> 12) & POCMR_CM_MASK);
+
+ /* mapped to PCI1 IO space 0x0 to local 0xe2000000 */
+ ios->potar1 = (MPC83xx_PCI1_LOWER_IO >> 12) & POTAR_TA_MASK;
+ ios->pobar1 = (MPC83xx_PCI1_IO_BASE >> 12) & POBAR_BA_MASK;
+ ios->pocmr1 = POCMR_EN | POCMR_IO |
+ (((~0UL -
+ (MPC83xx_PCI1_UPPER_IO -
+ MPC83xx_PCI1_LOWER_IO)) >> 12) & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl->pitar1 = 0x0;
+ pci_ctrl->pibar1 = 0x0;
+ pci_ctrl->piebar1 = 0x0;
+ pci_ctrl->piwar1 =
+ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+ PIWAR_IWS_2G;
+
+ /*
+ * Release PCI RST signal
+ */
+ pci_ctrl->gcr = 0;
+ udelay(2000);
+ pci_ctrl->gcr = 1;
+ udelay(2000);
+
+ reg16 = 0xff;
+ early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff);
+ early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER,
+ 0x80);
}
-/* PCI SUPPORT DOES NOT EXIT, MODEL after ppc85xx_setup.c */
+void __init mpc834x_ads_setup_pci2(struct pci_controller *hose)
+{
+ unsigned short reg16;
+ volatile immr_pcictrl_t *pci_ctrl;
+ volatile immr_ios_t *ios;
+ bd_t *binfo = (bd_t *) __res;
+
+ pci_ctrl = ioremap(binfo->bi_immr_base + 0x8600,
+ sizeof(immr_pcictrl_t));
+ ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t));
+
+ /*
+ * Configure PCI Outbound Translation Windows
+ */
+ ios->potar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POTAR_TA_MASK;
+ ios->pobar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POBAR_BA_MASK;
+ ios->pocmr3 = POCMR_EN | POCMR_DST |
+ (((~0UL -
+ (MPC83xx_PCI2_UPPER_MEM -
+ MPC83xx_PCI2_LOWER_MEM)) >> 12) & POCMR_CM_MASK);
+
+ /* mapped to PCI2 IO space 0x0 to local 0xe3000000 */
+ ios->potar4 = (MPC83xx_PCI2_LOWER_IO >> 12) & POTAR_TA_MASK;
+ ios->pobar4 = (MPC83xx_PCI2_IO_BASE >> 12) & POBAR_BA_MASK;
+ ios->pocmr4 = POCMR_EN | POCMR_DST | POCMR_IO |
+ (((~0UL -
+ (MPC83xx_PCI2_UPPER_IO -
+ MPC83xx_PCI2_LOWER_IO)) >> 12) & POCMR_CM_MASK);
+
+ /*
+ * Configure PCI Inbound Translation Windows
+ */
+ pci_ctrl->pitar1 = 0x0;
+ pci_ctrl->pibar1 = 0x0;
+ pci_ctrl->piebar1 = 0x0;
+ pci_ctrl->piwar1 =
+ PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |
+ PIWAR_IWS_2G;
+
+ /*
+ * Release PCI RST signal
+ */
+ pci_ctrl->gcr = 0;
+ udelay(2000);
+ pci_ctrl->gcr = 1;
+ udelay(2000);
+
+ reg16 = 0xff;
+ early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16);
+ reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
+ early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16);
+
+ /*
+ * Clear non-reserved bits in status register.
+ */
+ early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff);
+ early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER,
+ 0x80);
+}
+
+extern int mpc83xx_ads_map_irq(struct pci_dev *dev, unsigned char idsel,
+ unsigned char pin);
+extern int mpc83xx_ads_exclude_device(u_char bus, u_char devfn);
+
+/*
+ * PCI buses can be enabled only if SYS board combinates with PIB(Platform IO Board) board
+ * which provide 3 PCI slots. There is 2 PCI buses and 3 PCI slots,so people must configure
+ * the routes between them before enable PCI bus. This routes are under the control of PCA9555PW
+ * device which can be accessed via I2C bus 2 and are configured by firmware. Refer to Freescale to
+ * get more information about firmware configuration.
+ */
+void __init mpc83xx_setup_hose(void)
+{
+ unsigned long val32;
+ volatile immr_clk_t *clk;
+ volatile struct pci_controller *hose1;
+#ifdef CONFIG_MPC834x_PCI2
+ volatile struct pci_controller *hose2;
+#endif
+ volatile bd_t *binfo = (bd_t *) __res;
+
+ clk = ioremap(binfo->bi_immr_base + 0xA00, sizeof(immr_clk_t));
+
+ /*
+ * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode
+ */
+ val32 = clk->occr;
+ udelay(2000);
+ clk->occr = 0xff000000;
+ udelay(2000);
+
+ hose1 = pcibios_alloc_controller();
+ if (!hose1)
+ return;
+
+ ppc_md.pci_swizzle = common_swizzle;
+ ppc_md.pci_map_irq = mpc83xx_ads_map_irq;
+
+ hose1->bus_offset = 0;
+ hose1->first_busno = 0;
+ hose1->last_busno = 0xff;
+
+ setup_indirect_pci(hose1, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET,
+ binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET);
+ hose1->set_cfg_type = 1;
+
+ mpc83xx_setup_pci1(hose1);
+
+ hose1->pci_mem_offset = MPC83xx_PCI1_MEM_OFFSET;
+ hose1->mem_space.start = MPC83xx_PCI1_LOWER_MEM;
+ hose1->mem_space.end = MPC83xx_PCI1_UPPER_MEM;
+
+ hose1->io_base_phys = MPC83xx_PCI1_IO_BASE;
+ hose1->io_space.start = MPC83xx_PCI1_LOWER_IO;
+ hose1->io_space.end = MPC83xx_PCI1_UPPER_IO;
+#ifdef CONFIG_MPC834x_PCI2
+ isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE,
+ MPC83xx_PCI1_IO_SIZE +
+ MPC83xx_PCI2_IO_SIZE);
+#else
+ isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE,
+ MPC83xx_PCI1_IO_SIZE);
+#endif /* CONFIG_MPC834x_PCI2 */
+ hose1->io_base_virt = (void *)isa_io_base;
+ /* setup resources */
+ pci_init_resource(&hose1->io_resource,
+ MPC83xx_PCI1_LOWER_IO,
+ MPC83xx_PCI1_UPPER_IO,
+ IORESOURCE_IO, "PCI host bridge 1");
+ pci_init_resource(&hose1->mem_resources[0],
+ MPC83xx_PCI1_LOWER_MEM,
+ MPC83xx_PCI1_UPPER_MEM,
+ IORESOURCE_MEM, "PCI host bridge 1");
+
+ ppc_md.pci_exclude_device = mpc83xx_ads_exclude_device;
+ hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno);
+
+#ifdef CONFIG_MPC834x_PCI2
+ hose2 = pcibios_alloc_controller();
+ if (!hose2)
+ return;
+
+ hose2->bus_offset = hose1->last_busno + 1;
+ hose2->first_busno = hose1->last_busno + 1;
+ hose2->last_busno = 0xff;
+ setup_indirect_pci(hose2, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET,
+ binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET);
+ hose2->set_cfg_type = 1;
+
+ mpc834x_ads_setup_pci2(hose2);
+
+ hose2->pci_mem_offset = MPC83xx_PCI2_MEM_OFFSET;
+ hose2->mem_space.start = MPC83xx_PCI2_LOWER_MEM;
+ hose2->mem_space.end = MPC83xx_PCI2_UPPER_MEM;
+
+ hose2->io_base_phys = MPC83xx_PCI2_IO_BASE;
+ hose2->io_space.start = MPC83xx_PCI2_LOWER_IO;
+ hose2->io_space.end = MPC83xx_PCI2_UPPER_IO;
+ hose2->io_base_virt = (void *)(isa_io_base + MPC83xx_PCI1_IO_SIZE);
+ /* setup resources */
+ pci_init_resource(&hose2->io_resource,
+ MPC83xx_PCI2_LOWER_IO,
+ MPC83xx_PCI2_UPPER_IO,
+ IORESOURCE_IO, "PCI host bridge 2");
+ pci_init_resource(&hose2->mem_resources[0],
+ MPC83xx_PCI2_LOWER_MEM,
+ MPC83xx_PCI2_UPPER_MEM,
+ IORESOURCE_MEM, "PCI host bridge 2");
+
+ hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno);
+#endif /* CONFIG_MPC834x_PCI2 */
+}
+#endif /*CONFIG_PCI */
diff -urN -X dontdiff linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.h linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.h
--- linux-2.6.13-rc6/arch/ppc/syslib/ppc83xx_setup.h 2005-06-18 03:48:29.000000000 +0800
+++ linux-2.6.13-rc6-pci/arch/ppc/syslib/ppc83xx_setup.h 2005-08-23 10:25:43.000000000 +0800
@@ -12,6 +12,14 @@
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __PPC_SYSLIB_PPC83XX_SETUP_H
@@ -20,6 +28,7 @@
#include <linux/config.h>
#include <linux/init.h>
#include <asm/ppcboot.h>
+#include <asm/mpc83xx.h>
extern unsigned long mpc83xx_find_end_of_memory(void) __init;
extern long mpc83xx_time_init(void) __init;
@@ -30,15 +39,6 @@
extern void mpc83xx_halt(void);
extern void mpc83xx_setup_hose(void) __init;
-/* PCI config */
-#if 0
-#define PCI1_CFG_ADDR_OFFSET (FIXME)
-#define PCI1_CFG_DATA_OFFSET (FIXME)
-
-#define PCI2_CFG_ADDR_OFFSET (FIXME)
-#define PCI2_CFG_DATA_OFFSET (FIXME)
-#endif
-
/* Serial Config */
#ifdef CONFIG_SERIAL_MANY_PORTS
#define RS_TABLE_SIZE 64
@@ -50,4 +50,4 @@
#define BASE_BAUD 115200
#endif
-#endif /* __PPC_SYSLIB_PPC83XX_SETUP_H */
+#endif /* __PPC_SYSLIB_PPC83XX_SETUP_H */
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050830/ef54ae51/attachment.htm
More information about the Linuxppc-embedded
mailing list