Linux Kernel MTD question

[JohnsonCheng]

It doesn't work, too. 
Error message: Invalid argument.

Thanks,
Johnson Cheng

-----Original Message-----
From: linuxppc-embedded-bounces at ozlabs.org
[mailto:linuxppc-embedded-bounces at ozlabs.org] On Behalf Of Robert P. J. Day
Sent: Tuesday, August 23, 2005 11:24 AM
To: JohnsonCheng
Cc: linuxppc-embedded at ozlabs.org
Subject: RE: Linux Kernel MTD question 

On Sat, 23 Jul 2005, JohnsonCheng wrote:

> Yes. You are right. It's design by myself.
> But I meet a problem. If I have three configuration files, A.conf, B.conf
> and C.conf, then I hope save them in one of partitions of MTD,
> 0x005C0000-0x10000000.
> Two questions:
> 1. How to build these configuration files into an image for U-boot with
> mkimage?
> 2. In kernel, how to get these data? I use "mount /dev/mtd4 /mnt", but it
> failed by block device required.

for this second issue, you might try mounting the block device, which
is probably called /dev/mtdblock4 or something similar.

rday
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded at ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded