Linux Kernel MTD question

[Wolfgang Denk]

In message <20050822104924.214ED429CB at denx.de> you wrote:
> 
> How can I put the Environment variables or configurations in
> 0x00060000-0x00080000, or put User Data in 0x005C0000-0x1000000?
> Use U-boot command? Or....

It is up to you to define a memory map for your flash  device(s)  and
create  appropriate partitions for this map in Linux (and probably in
U-Boot, too, using the new "mtdparts" command).

Then you can use standard commands in U-Boot (erase, cp) and in Linux
(erase_all, cp) to store any data you likein your flash.

It is *your* design. *You* must create it.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The IQ of the group is the lowest IQ of a member of the group divided
by the number of people in the group.