[PATCH] ppc32: fix EMAC Tx channel assignments for NPe405H

[Eugene Surovegin]

Fix PowerPC NPe405H EMAC Tx channel assignments. EMAC unit in this 
chip uses common for 4xx "two Tx / one Rx" configuration.

Signed-off-by: Eugene Surovegin <ebs at ebshome.net>

diff --git a/arch/ppc/platforms/4xx/ibmnp405h.c b/arch/ppc/platforms/4xx/ibmnp405h.c
--- a/arch/ppc/platforms/4xx/ibmnp405h.c
+++ b/arch/ppc/platforms/4xx/ibmnp405h.c
@@ -34,7 +34,7 @@ static struct ocp_func_emac_data ibmnp40
 	.zmii_mux	= 1,		/* ZMII input of this EMAC */
 	.mal_idx	= 0,		/* MAL device index */
 	.mal_rx_chan	= 1,		/* MAL rx channel number */
-	.mal_tx_chan	= 1,		/* MAL tx channel number */
+	.mal_tx_chan	= 2,		/* MAL tx channel number */
 	.wol_irq	= 41,		/* WOL interrupt number */
 	.mdio_idx	= -1,		/* No shared MDIO */
 	.tah_idx	= -1,		/* No TAH */
@@ -46,7 +46,7 @@ static struct ocp_func_emac_data ibmnp40
 	.zmii_mux	= 2,		/* ZMII input of this EMAC */
 	.mal_idx	= 0,		/* MAL device index */
 	.mal_rx_chan	= 2,		/* MAL rx channel number */
-	.mal_tx_chan	= 2,		/* MAL tx channel number */
+	.mal_tx_chan	= 4,		/* MAL tx channel number */
 	.wol_irq	= 41,		/* WOL interrupt number */
 	.mdio_idx	= -1,		/* No shared MDIO */
 	.tah_idx	= -1,		/* No TAH */
@@ -58,7 +58,7 @@ static struct ocp_func_emac_data ibmnp40
 	.zmii_mux	= 3,		/* ZMII input of this EMAC */
 	.mal_idx	= 0,		/* MAL device index */
 	.mal_rx_chan	= 3,		/* MAL rx channel number */
-	.mal_tx_chan	= 3,		/* MAL tx channel number */
+	.mal_tx_chan	= 6,		/* MAL tx channel number */
 	.wol_irq	= 41,		/* WOL interrupt number */
 	.mdio_idx	= -1,		/* No shared MDIO */
 	.tah_idx	= -1,		/* No TAH */