[RFC][PATCH] [1/2] 8xx platform definitions

[Dan Malek]

On Aug 19, 2005, at 8:44 AM, Vitaly Bordug wrote:

> +#define MPC8xx_INT_FEC1		SIU_LEVEL1
> +#define MPC8xx_INT_FEC2		SIU_LEVEL3
> +
> +#define MPC8xx_INT_SCC1		(CPM_IRQ_OFFSET + CPMVEC_SCC1)
> +#define MPC8xx_INT_SCC2		(CPM_IRQ_OFFSET + CPMVEC_SCC2)
> +#define MPC8xx_INT_SCC3		(CPM_IRQ_OFFSET + CPMVEC_SCC3)
> +#define MPC8xx_INT_SCC4		(CPM_IRQ_OFFSET + CPMVEC_SCC4)
> +#define MPC8xx_INT_SMC1		(CPM_IRQ_OFFSET + CPMVEC_SMC1)
> +#define MPC8xx_INT_SMC2		(CPM_IRQ_OFFSET + CPMVEC_SMC2)
> +
> +/* Offset from IMMAP base address */
> +#define MPC8xx_SCC1_OFFSET	(0xa00)
> +#define MPC8xx_SCC1_SIZE	(0x18)
> +#define MPC8xx_SCC2_OFFSET	(0xa20)
> +#define MPC8xx_SCC2_SIZE	(0x18)
> +#define MPC8xx_SCC3_OFFSET	(0xa40)
> +#define MPC8xx_SCC3_SIZE	(0x18)
> +#define MPC8xx_SCC4_OFFSET	(0xa60)
> +#define MPC8xx_SCC4_SIZE	(0x18)
> +#define MPC8xx_SMC1_OFFSET	(0xa82)
> +#define MPC8xx_SMC1_SIZE	(0x0f)
> +#define MPC8xx_SMC2_OFFSET	(0xa92)
> +#define MPC8xx_SMC2_SIZE	(0x0d)
> +#define MPC8xx_FEC1_OFFSET	(0xe00)
> +#define MPC8xx_FEC1_SIZE	(0x88)
> +#define MPC8xx_FEC2_OFFSET	(0x1e00)
> +#define MPC8xx_FEC2_SIZE	(0x88)
> +
> +#define MPC8xx_DPARAM_SCC1_OFFSET	(0x3C00)
> +#define MPC8xx_DPARAM_SCC1_SIZE	(0x80)
> +#define MPC8xx_DPARAM_SCC2_OFFSET	(0x3D00)
> +#define MPC8xx_DPARAM_SCC2_SIZE	(0x80)
> +#define MPC8xx_DPARAM_SCC3_OFFSET	(0x3E00)
> +#define MPC8xx_DPARAM_SCC3_SIZE	(0x80)
> +#define MPC8xx_DPARAM_SCC4_OFFSET	(0x3F00)
> +#define MPC8xx_DPARAM_SCC4_SIZE	(0x80)
> +#define MPC8xx_DPARAM_SMC1_OFFSET	(0x3E80)
> +#define MPC8xx_DPARAM_SMC1_SIZE	(0x40)
> +#define MPC8xx_DPARAM_SMC2_OFFSET	(0x3F80)
> +#define MPC8xx_DPARAM_SMC2_SIZE	(0x40)

All of these #defines should already be in a header file somewhere,
and if they aren't, should be in the generic CPM header file.
Please clean this up.

Thanks.

	-- Dan