Best kernel for Xilinx VirtexII Pro/PPC405 ?

Andrei Konovalov akonovalov at ru.mvista.com
Wed Aug 17 02:15:04 EST 2005


Keith J Outwater wrote:
> Hi Andrei - 
> Just to be clear: we are talking about linuxppc-2.4 NOT 
> linuxppc_2_4_devel, right?

Correct.

Thanks,
Andrei

> Keith
> 
> Andrei Konovalov <akonovalov at ru.mvista.com> wrote on 08/16/2005 03:38:39 
> AM:
> 
> 
>>Keith J Outwater wrote:
>>
>>>Hello all - 
>>>I am designing an embedded system using a Xilinx Virtex II Pro FPGA.
>>>Can anyone point me to the "best" kernel source tree to use ?
>>>"Best" in this case means:
>>>1. A 2.4 series kernel with good support for Xilinx peripheral devices 
> 
> 
>>>(existing Xilinx ML300 support is fine).
>>>2. Good stability
>>>
>>>By default I'll use the Montavista linuxppc_2.4 tree unless there is a 
> 
> 
>>>better choice out there.
>>
>>If you mean the rsync access to source.mvista.com::linuxppc-2.4
>>then yes, this is the most recent (as regards to Virtex II Pro support)
>>community 2.4 tree.
>>
>>Thanks,
>>Andrei
>>
>>
>>>Thanks!
>>>
>>>Keith
>>>_______________________________________________
>>>Linuxppc-embedded mailing list
>>>Linuxppc-embedded at ozlabs.org
>>>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>>
> 
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded





More information about the Linuxppc-embedded mailing list