答复: Bad Magic Number when boot linux kernel with ppcboot (PPC860 board)

FCG WANG Baohua Baohua.WANG at alcatel-sbell.com.cn
Tue Aug 2 13:28:20 EST 2005


Dear Mr Liu:
 I have corrected it, Now another question:
 when bootm or imi , it shows the "Verifying Checksum ... Bad Data CRC", But I checked the vmlinux.UBoot on host, it is right,
 I download it using TFTP, How can I slove it? Thanks!


-----原始邮件-----
发件人: Debora Liu [mailto:deboralh at fel.com.cn]
发送时间: 2005年8月2日 11:17
收件人: FCG WANG Baohua
抄送: Linuxppc-embedded
主题: Re: Bad Magic Number when boot linux kernel with ppcboot (PPC860
board)


Hello, FCG WANG Baohua

In message <2005-08-02 10:08:35 Baohua.WANG at alcatel-sbell.com.cn> you wrote:

>Dear All:
>  I use a PPC860 board and ELDK 3.1.1 (kernel 2.4.25) to boot the linux kernel, after I loaded it print the following messages:
>
>=> bootm 0x180000
>## Booting image at 00000000 ...
>Bad Magic Number
>=>
Please check your boot load image address.

				 
        Debora Liu
        deboralh at fel.com.cn
          2005-08-02






More information about the Linuxppc-embedded mailing list