[PATCH 2.6.12-rc2] Freescale 8272ADS PCI bridge support to thestock linux-2.5 (updated)

[Rune Torgersen]

The patch works on MPC8266ADS board using PQ2FADS setup with a couple of
hacks to disable some stuff the PQ2 has that the 8266ADS doesn't

> -----Original Message-----
> From: Vitaly Bordug [mailto:vbordug at ru.mvista.com] 
> Sent: Friday, April 29, 2005 06:29
> To: Kumar Gala
> Cc: Rune Torgersen; Wolfgang Denk; Tom Rini; linuxppc-embedded list
> Subject: Re: [PATCH 2.6.12-rc2] Freescale 8272ADS PCI bridge 
> support to thestock linux-2.5 (updated)
> 
> Kumar,
> 
> This is what currently intended to represent on-chip PCI 
> bridge support 
> for PQ2 family.
> It's approved working on my 8272 and have a very good probably of the 
> same on the PQ2FADS-VR board. It contains low-level (SIUMCR & CPLD IC 
> chip select ) setup only for 8272 and PQ2FADS, considering 
> that u-boot 
> does this stuff for 8266 boards. The actual source files are 
> renamed to 
> m82xx_pci.[ch].
> 
> Rune, can you test this for m8266/8265 ? I guess while IRQ stuff is 
> nearly the same, this _should_ work as is or with minimum 
> effort. Note 
> that you'll need to define PCI_INT_TO_SIU in platforms/pq2ads.h (I 
> suppose it's the same as PQ2FADS - SIU_INT_IRQ6,  but I'm not sure).
> 
> Signed-off-by: Vitaly Bordug <vbordug at ru.mvista.com>
> 
> -- 
> Sincerely, 
> Vitaly
> 
>