[PATCH 2.6.12-rc2] Freescale 8272ADS PCI bridge support to thestock linux-2.5 (updated)

[Vitaly Bordug]

Kumar,

This is what currently intended to represent on-chip PCI bridge support 
for PQ2 family.
It's approved working on my 8272 and have a very good probably of the 
same on the PQ2FADS-VR board. It contains low-level (SIUMCR & CPLD IC 
chip select ) setup only for 8272 and PQ2FADS, considering that u-boot 
does this stuff for 8266 boards. The actual source files are renamed to 
m82xx_pci.[ch].

Rune, can you test this for m8266/8265 ? I guess while IRQ stuff is 
nearly the same, this _should_ work as is or with minimum effort. Note 
that you'll need to define PCI_INT_TO_SIU in platforms/pq2ads.h (I 
suppose it's the same as PQ2FADS - SIU_INT_IRQ6,  but I'm not sure).

Signed-off-by: Vitaly Bordug <vbordug at ru.mvista.com>

-- 
Sincerely, 
Vitaly

-------------- next part --------------
A non-text attachment was scrubbed...
Name: PQII_pci.patch
Type: text/x-patch
Size: 32879 bytes
Desc: not available
Url : http://ozlabs.org/pipermail/linuxppc-embedded/attachments/20050429/e3d793f4/attachment.bin