connecting BDI2000 to ML403

[Peter Ryser]

If your debugger needs nTRST and HALT you can route the JTAG signals of 
the PPC405 processor through user IO pins to the expansion connector.

- Peter


Peter 'p2' De Schrijver wrote:

>Hi,
>
>I'm trying to figure out how to connect the BDI 2000 with a Xilinx ML403 
>development board. As far as I can see in the ML403 schematics, the JTAG
>connector lacks the nTRST and the HALT signals needed for JTAG
>debugging. Any ideas ?
>
>Thanks,
>
>Peter (p2).
>  
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Linuxppc-embedded mailing list
>Linuxppc-embedded at ozlabs.org
>https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>