uboot and ppc405

[Peter Ryser]

Hi,

please have a look at "Getting started with U-Boot and ML300" 
http://www.xilinx.com/bvdocs/appnotes/xapp542.pdf that describes how to 
use U-Boot with Xilinx Virtex-II Pro devices.

You might also want to have a look at the README.ml300 in the u-boot 
source tree that provides a quick start.

- Peter


grave wrote:

> Hi,
>
> We re starting a disign with xilinx chip Virtex II pro and I wonder 
> the  typical size of an uboot binary. This is for our electronician 
> disigner  in order to dimension the prom and so on...
>
> Any hint welcome,
>
> Thanks in advance, xavier grave
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded at ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>