different device file name when relocating SMC1?

[Wolfgang Denk]

In message <Pine.LNX.4.60.0407240816340.11139 at localhost.localdomain> you wrote:
>
>       so, simple question -- until now, we've identified the console as
> ttyS0, and it's worked fine.  does relocation require referring to the
> console with a different device file name?  i (vaguely) recall /dev

No.

> entries with names like cpmuart0 or something like that.  given

No.

> relocation, should i be using something other than "ttyS0"?

No. [Unless you changed the driver and/or configured your  system  so
that SMC1 is not the first entry in the port table.]

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Never underestimate the bandwidth of a station wagon full of tapes.
                                -- Dr. Warren Jackson, Director, UTCS

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/