PPCBOOT in customised MPC860T board

[Wolfgang Denk]

In message <OF6966D76E.A0BB8139-ON65256E40.001AB153 at lntinfotech.com> you wrote:
>
> check out the following link
> http://www.uclinux.org/~bkuhn/Platforms/Coldfire/tarifa/20020526/README
> if ur still interested with ppcboot this will give u a good idea ;-)-

This is very, very misleading information.

First, the link points to a  very  old  document.  Many  things  have
changed in the last 2 years.

Second, the ColdFire is still one of the "new" processors  which  are
supported  by  U-Boot, and obviously it was much worse two years ago.
On the other hand, the MPC860  was  the  very  first  processor  ever
supported by U-Boot and it's predecessor PPCBoot.


If you're looking for up-to-date information about U-Boot you should
rather read the manual at
http://www.denx.de/twiki/bin/view/DULG/Manual

Best regards,

Wolfgang Denk

--
See us @ Embedded World, Nuremberg, Feb 17 - 19,  Hall 12.0 Booth 440
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
grep me no patterns and I'll tell you no lines.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/