Error cross-building Linux 2.6 for 8xx
Povolotsky, Alexander
Alexander.Povolotsky at marconi.com
Fri Dec 17 02:31:13 EST 2004
Hi - I am double posting this on both: linuxppc-embedded at ozlabs.org and
etux at embeddedtux.org, hoping to
increase the audience and, hence, to maximize the number of responses (if
only the same people read both mail lists,
why such duplicate redundant mail lists exist ?)
I recognize and highly appreciate what Wolfgang Denk <wd at denx.de> wrote (to
me) on etux at embeddedtux.org:
>Forget the combination of a 2.6 kernel and a MPC8xx processor for
>now. There are still serious problems in 2.6 on these processors.
But at least (I thought) I should be able to build the 2.6 kernel for 8xx.
So firstly I ran into I2C "no-current-support-for-8xx" (see details in the
listed below e-mail chain) ...
Then I took the I2C configuration out and tried to build the kernel again -
but I am still getting errors
(not sure though whether cross-compiler "contributes" to those recent errors
or not ... - I would, as always,
appreciate any opinion/input ! ):
Make zImage
CHK include/linux/version.h
make[1]: `arch/ppc/kernel/asm-offsets.asm' is up to date.
CHK include/linux/compile.h
CC arch/ppc/8xx_io/uart.o
arch/ppc/8xx_io/uart.c:82: warning: type defaults to `int' in declaration of
`DECLARE_TASK_QUEUE'
arch/ppc/8xx_io/uart.c:82: warning: parameter names (without types) in
function declaration
arch/ppc/8xx_io/uart.c: In function `serial_console_device':
arch/ppc/8xx_io/uart.c:145: error: storage class specified for parameter
`rs_table'
arch/ppc/8xx_io/uart.c:145: error: parameter `rs_table' is initialized
Thanks,
Best Regards,
Alex
-----Original Message-----
From: Dan Malek [mailto:dan at embeddededge.com]
Sent: Wednesday, December 15, 2004 11:54 AM
To: Povolotsky, Alexander
Cc: 'linuxppc-embedded at ozlabs.org'
Subject: Re: I2C + Linux 2.6 on MPC880/MPC885 based board(s)
On Dec 15, 2004, at 11:04 AM, Povolotsky, Alexander wrote:
> On a software (Linux 2.6) side ...
> Did you deal with Linux 2.6 + MPC880/MPC885 (or at least any MPC8xx) ?
> If yes, what I2C settings in .config were used for successful 2.6 kernel
> build ?
> I am having a problem building it (see below attached) ... - that is
> why I am trying to understand from the hardware point of view - hence my
h/w related questions
> ... - the importance of I2C.
It looks like someone that has an interest in
using the CPM I2C (which isn't me) will need to port it first to 2.6,
then provide the board specific functions for set up and control.
On top of this, if you want to run the SMBus protocols, you will
need a much more complex CPM I2C functions.
-- Dan
******************
-----Original Message-----
From: Povolotsky, Alexander
Sent: Tuesday, December 14, 2004 6:13 PM
To: 'Greg KH'; Jean Delvare
Subject: RE: 8xx i2c drivers (cross)compilation errors on Linux 2.6.8
Hi,
>Alexander, what arch are you building for?
PPC ->8xx ->MPC880 (Motorola -> FreeScale Semiconductor)
http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPC885&nodeId
=018rH3bTdG4204
Thanks,
Best Regards,
Alex
PPS I have attached my original e-mail in its entirety (at the end ).
-----Original Message-----
From: Greg KH [mailto:greg at kroah.com]
Sent: Tuesday, December 14, 2004 4:50 PM
To: Jean Delvare
Cc: Alexander.Povolotsky at marconi.com
Subject: Re: 8xx i2c drivers (cross)compilation errors on Linux 2.6.8
On Tue, Dec 14, 2004 at 10:38:00AM +0100, Jean Delvare wrote:
>
> On 2004-12-14, Alexander Povolotsky wrote:
>
> > Hi,
> >
> > I have the following .config setup:
> > (...)
> > CONFIG_I2C_RPXLITE=y
> > (...)
> >
> > Originally I was getting error:
> > CC drivers/i2c/busses/i2c-rpx.o
> > drivers/i2c/busses/i2c-rpx.c:20:32: linux/i2c-algo-8xx.h: No such file
or
> > directory - why I am missing it - any hint ?
>
> Hm, looks like the 8xx i2c algorithm was never ported to Linux 2.6. Greg,
> how come that the RPX adapter driver is present in the tree and the
> algorithm it depends on isn't?
Because no one ever sent me the patch with those files in it? :)
I have no idea, I've not cross built this driver before.
> Greg, could it be that an arch-specific (m68k? don't know what this
> rpx/8xx thing is) variant of the Linux tree already has the i2c-algo-8xx
> driver ported to 2.6? We probably want to import it into the main tree
> if this is the case (having adapter drivers that won't compile doesn't
> sound good...)
It might, I've seen i2c drivers in different arch specific trees (like
sh for example I know has a few.)
Alexander, what arch are you building for?
thanks,
greg k-h
*************
-----Original Message-----
From: Jean Delvare [mailto:khali at linux-fr.org]
Sent: Tuesday, December 14, 2004 4:38 AM
To: Alexander.Povolotsky at marconi.com; greg at kroah.com
Subject: Re: 8xx i2c drivers (cross)compilation errors on Linux 2.6.8
On 2004-12-14, Alexander Povolotsky wrote:
> Hi,
>
> I have the following .config setup:
> (...)
> CONFIG_I2C_RPXLITE=y
> (...)
>
> Originally I was getting error:
> CC drivers/i2c/busses/i2c-rpx.o
> drivers/i2c/busses/i2c-rpx.c:20:32: linux/i2c-algo-8xx.h: No such file or
> directory - why I am missing it - any hint ?
Hm, looks like the 8xx i2c algorithm was never ported to Linux 2.6. Greg,
how come that the RPX adapter driver is present in the tree and the
algorithm it depends on isn't?
> So I copied the i2c-algo-8xx.h file from Linux 2.4.26 distribution ...
> could I use it ?
> (if not - could you send me the correct i2c-algo-8xx.h file ? - TIA !)
I don't think it'll work. The header file is one thing, the algorithm
driver is another and you would need to port both (they proabbly won't
work out of the box due to important changes in the i2c subsystem
between 2.4 and 2.6 kernels). Also, obviously the RPX adapter driver
couldn't be used so far so it was possibly never tested. There will
probably be much porting and debugging work if you want to get it to
work.
Greg, could it be that an arch-specific (m68k? don't know what this
rpx/8xx thing is) variant of the Linux tree already has the i2c-algo-8xx
driver ported to 2.6? We probably want to import it into the main tree
if this is the case (having adapter drivers that won't compile doesn't
sound good...)
Alexander, at any rate, there's not much I can do myself, as I don't
have compatible hardware to port/test/debug the i2c-algo-8xx and i2c-rpx
drivers. Sorry.
Thanks,
--
Jean Delvare
-----Original Message-----
From: Povolotsky, Alexander
Sent: Monday, December 13, 2004 10:22 PM
To: 'khali at linux-fr.org'
Subject: 8xx i2c drivers (cross)compilation errors on Linux 2.6.8
Hi,
I have the following .config setup:
.....
# I2C Hardware Bus support
#
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ISA is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_RPXLITE=y
# CONFIG_SCx200_ACB is not set
#
# Hardware Sensors Chip support
#
# CONFIG_I2C_SENSOR is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
...............
Originally I was getting error:
CC drivers/i2c/busses/i2c-rpx.o
drivers/i2c/busses/i2c-rpx.c:20:32: linux/i2c-algo-8xx.h: No such file or
directory - why I am missing it - any hint ?
So I copied the i2c-algo-8xx.h file from Linux 2.4.26 distribution ... could
I use it ?
(if not - could you send me the correct i2c-algo-8xx.h file ? - TIA !)
Then I started to get another error:
CC drivers/i2c/busses/i2c-rpx.o
In file included from drivers/i2c/busses/i2c-rpx.c:20:
include/linux/i2c-algo-8xx.h:15: warning: type defaults to `int' in
declaration of `i2c8xx_t'
include/linux/i2c-algo-8xx.h:15: warning: no semicolon at end of struct or
union
include/linux/i2c-algo-8xx.h:15: error: parse error before '*' token
include/linux/i2c-algo-8xx.h:16: error: parse error before '*' token
include/linux/i2c-algo-8xx.h:16: warning: type defaults to `int' in
declaration of `iip'
include/linux/i2c-algo-8xx.h:16: warning: data definition has no type or
storage class
include/linux/i2c-algo-8xx.h:17: error: parse error before '*' token
include/linux/i2c-algo-8xx.h:17: warning: type defaults to `int' in
declaration of `cp'
include/linux/i2c-algo-8xx.h:17: warning: data definition has no type or
storage class
include/linux/i2c-algo-8xx.h:25: error: parse error before '}' token
drivers/i2c/busses/i2c-rpx.c: In function `rpx_iic_init':
drivers/i2c/busses/i2c-rpx.c:34: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:38: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:38: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:39: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:39: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:41: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:42: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:53: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c:56: error: dereferencing pointer to incomplete
type
drivers/i2c/busses/i2c-rpx.c: At top level:
drivers/i2c/busses/i2c-rpx.c:67: error: variable `rpx_data' has initializer
but incomplete type
drivers/i2c/busses/i2c-rpx.c:68: error: unknown field `setisr' specified in
initializer
drivers/i2c/busses/i2c-rpx.c:69: warning: excess elements in struct
initializer
drivers/i2c/busses/i2c-rpx.c:69: warning: (near initialization for
`rpx_data')
drivers/i2c/busses/i2c-rpx.c:67: error: storage size of `rpx_data' isn't
known
make[3]: *** [drivers/i2c/busses/i2c-rpx.o] Error 1
make[2]: *** [drivers/i2c/busses] Error 2
make[1]: *** [drivers/i2c] Error 2
make: *** [drivers] Error 2
Here is the listing of i2c-algo-8xx.h I have (from Linux 2.4.26 distribution
)
/* ------------------------------------------------------------------------
/* i2c-algo-8xx.h i2c driver algorithms for MPX8XX CPM
/* ------------------------------------------------------------------------
/* $Id$ */
#ifndef I2C_ALGO_8XX_H
#define I2C_ALGO_8XX_H 1
#include <linux/i2c.h>
struct i2c_algo_8xx_data {
uint dp_addr;
int reloc;
volatile i2c8xx_t *i2c;
volatile iic_t *iip;
volatile cpm8xx_t *cp;
int (*setisr) (int irq,
void (*func)(int, void *, struct pt_regs *),
const char *name,
void *data);
u_char temp[513];
};
int i2c_8xx_add_bus(struct i2c_adapter *);
int i2c_8xx_del_bus(struct i2c_adapter *);
#endif /* I2C_ALGO_8XX_H */
Thanks,
Best Regards,
I will highly Appreciate your response/help !
Alex Povolotsky
More information about the Linuxppc-embedded
mailing list