did you give me the right ml300_edk*.zip link?

[Mike Wellington]

the link that you sent me was to ml300_edk2.zip ,
how can I download the ml300_edk3.zip ?

-mikew



eter Ryser wrote:
> Mike,
>
> the ml300_edk2.zip design does not have PCI at all. Only the
> ml300_edk3.zip, i.e. the design to which the link currently points has
> the pcore that works with Linux.
>
> - Peter
>
>
> Mike Wellington wrote:
>
>> Peter - I thought that the edk2 example from the link
>> you gave me was the pcore I was using.  I will start
>> over from scratch and try again.
>>
>> My machine is busy doing some big  downloads/backups
>> so it will be tonite/tomorrow before I can verify
>> and report back.
>>
>>
>>
>>
>>
>> Peter Ryser wrote:
>>
>>> The PCI support that is currently included in the Linux kernel tree
>>> is for the V2PDK based OPB -> PCI bridge. It will not work with the
>>> EDK based OPB -> PCI bridge, i.e. you will find exactly what you see.
>>>
>>> Please download the EDK reference design for ML300 from
>>> http://www.xilinx.com/ise/embedded/edk_examples.htm (design #6). The
>>> design contains the V2PDK based bridge (including the pcore therefor)
>>> and, thus, the Linux kernel will work fine with that design.
>>>
>>> We are currently working on moving to the EDK based bridge and the
>>> Linux kernel tree will be patched once this work is completed.
>>>
>>> - Peter
>>>
>>>
>>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/