pci on MBX860

[Amit.Lubovsky at infineon.com]

Hi,

Does anyone have any experience with pci on the MBX860 board ?

I run kernel 2.4.20 from www.denx.de but encountered compilation problems
after trying to configure pci.

this is the output of what I got:

kernel configuration:

I have enabled General setup-> QSpan PCI


and then while compiling the kernel got:

make uImage
...

ppc_8xx-gcc -D__KERNEL__ -I/opt/eldk/usr/src/linuxppc_2_4_devel/include
-Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing
-fno-common -fomit-frame-pointer
-I/opt/eldk/usr/src/linuxppc_2_4_devel/arch/ppc -fsigned-char -msoft-float
-pipe -ffixed-r2 -Wno-uninitialized -mmultiple -mstring   -nostdinc -I
/opt/eldk/usr/lib/gcc-lib/ppc-linux/2.95.4/include
-DKBUILD_BASENAME=m8xx_setup  -c -o m8xx_setup.o m8xx_setup.c
m8xx_setup.c: In function `m8xx_show_percpuinfo':
m8xx_setup.c:252: warning: int format, long int arg (arg 3)
m8xx_setup.c:252: warning: int format, long int arg (arg 4)
m8xx_setup.c: In function `m8xx_init_IRQ':
m8xx_setup.c:281: structure has no member named `irq_offset'
m8xx_setup.c: In function `platform_init':
m8xx_setup.c:357: warning: implicit declaration of function
`m8xx_setup_pci_ptrs'
make[1]: *** [m8xx_setup.o] Error 1
make[1]: Leaving directory
`/opt/eldk/usr/src/linuxppc_2_4_devel/arch/ppc/kernel'
make: *** [_dir_arch/ppc/kernel] Error 2
[root at amit_lap linuxppc_2_4_devel]#

any info is appreciated,
Thanks,
Amit.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/