dcbz works on 862 everywhere!

[Dan Malek]

Joakim Tjernlund wrote:

> OK, here it goes.

No, this isn't correct......


> + /* The 20 msb of MD_EPN and DAR must be the same when rfi is
> +  * executed. The dcxx instructions don't set DAR when they
> +  * cause a DTLB Miss so copy them from MD_EPN.

No, don't be screwing around with these registers.



> -#ifdef CONFIG_8xx
> +#ifdef CONFIG_8xx_CPU6

What is this all about?  The CPU6 errata is a clearly defined
problem on well known silicon revisions.  Don't be using it where
it isn't intended.

Please try again..........thanks.


	-- Dan


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/