Serial Console

[Aman]

 Hi

 In the Redhat 7.0 linux, I was able to enable/disable the serial console
 using the following command in the inittab
 " T0:12345:respawn:/sbin/getty ttyS0 9600 vt100"
 However in the case of the 440 Linux the serial console is enabled already.
 I wanted to know how this enabling is done. Can someone add some points to
 this.

 Thanking you in advance
 Regards
 Aman


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/