debugging using BDI2000 on MPC860

Stephan Linke Stephan.Linke at
Mon Jun 16 20:56:23 EST 2003


I want to use our BDI2000 to debug my MPC860 board. Unfortunately it always stops with a machine check interrupt at 0x00000100.
Flashing works fine.
Our flash is at 0xff000000, IMMR at f0000000...

Any ideas? How do I define the boot address in MPC860 config files.

Thanks, Stephan

** Sent via the linuxppc-embedded mail list. See

More information about the Linuxppc-embedded mailing list