SMC2 synchronous driver for 8xx

[Alex Zeffertt]

Hi Dmytro,

This is probably not very close to what you want, but....  If you want
to see an example of how to configure the TSA, SIRAM, and the signals
L1RSYNCx, and L1TSYNCx, you could have a look at the source for the
tsa.o module on my site http://mpc860sar.sourceforge.net.

This code sets up the serial interface to carry ATM traffic generated by
SCC1.  Although this is not what you want to do, the code may be helpful
as an example for setting up the low level stuff.

Alex

On Wed, 2003-07-30 at 07:03, Dmytro Bablinyuk wrote:
> I have kernel 2.4.21 and MPC866ADS eval board. The sync should work
> through TSA using signals L1RSYNCx, L1TSYNCx etc.
> I've been suggested to use syncppp.c module in my kernel and hdlcppp.c
> which I could not find anywhere, the ftp://qslinux.org is not working.
> If this is right could somebody please email me a hdlcppp and give me a
> clue where to start.
> I will very much appreciate if anybody already done something similar to
> give me a clue where to look at, and I will very much appreciate any
> code, examples.
>
> Thank you very much for any help.
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/