Problem with starting up 2.4.21 kernel

[Dmytro Bablinyuk]

After "Transferring control to Linux (at address 00000000)" nothing seems happen (see below). From BDI2000 I discovered that it shorlty after locks at 0xc0092aec address (the MPC866ADS eval board used).
I tried to turn on the kernel hacking options and turn off everything I don't need right now but it does not help a lot.
Could anybody give me a clue what this could be about.

Thank you in advance for any help.

### main_loop: bootcmd="bootm 0x2880000 0x2900000; setenv bootargs root=/dev/ram rw"
Hit any key to stop autoboot:  0
## Booting image at 02880000 ...
   Image Name:   Linux-2.4.21-erik
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    489849 Bytes = 478.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Current stack ends at 0x0075BBE8 => set upper limit to 0x0075B3E0
## cmdline at 0x0075B2E0 ... 0x0075B2F0
bd address  = 0x0075BFC4
memstart    = 0x00000000
memsize     = 0x00800000
flashstart  = 0x02800000
flashsize   = 0x00200000
flashoffset = 0x00025000
sramstart   = 0x00000000
sramsize    = 0x00000000
immr_base   = 0x02200000
bootflags   = 0x00000001
intfreq     =     50 MHz
busfreq     =     50 MHz
ethaddr     = 00:24:20:10:18:6A
IP addr     = 172.25.193.23
baudrate    =  19200 bps
## Loading RAMDisk Image at 02900000 ...
   Image Name:   Simple Ramdisk Image
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    859578 Bytes = 839.4 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## initrd at 0x02900040 ... 0x029D1DF9 (len=859578=0xD1DBA)
   Loading Ramdisk to 00689000, end 0075adba ... OK
## Transferring control to Linux (at address 00000000) ...


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/