debug irregularly!

[Steven Blakeslee]

Most likely you are compiling with optimization enabled.  This can cause the
c code to execute in a different sequence than you wrote.

-----Original Message-----
From: Qsyang [mailto:yangqs at 163.com]
Sent: Friday, August 29, 2003 5:50 AM
To: linuxppc-embedded at lists.linuxppc.org
Subject: debug irregularly!



hi,there
          when i debug(debugger=BDI2000;cpu=8xx) U-boot in flash, it
jumps irregularly as it running into "C" code, which always trouble me
-<. How can i get a "normal" debug sequence? is it need to add some
debug parameter into config.mk?
          thanks for any help !
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Qsyang
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡yangqs at 163.com
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2003-08-29


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/