Can i use BDI2000 to debug "U-Boot" in Flash memory ?

[Steven Blakeslee]

If you are debugging the code from FLASH make sure you use hardware break
points, software break points will not work.

-----Original Message-----
From: Qsyang [mailto:yangqs at 163.com]
Sent: Monday, August 25, 2003 9:21 PM
To: linuxppc-embedded at lists.linuxppc.org
Subject: Can i use BDI2000 to debug "U-Boot" in Flash memory ?



 Hi:
 i am new to this, i am porting U-Boot to my MPC852 board. First of
 all i programed the monitor code to Flash memory through BDI2000, i
 just want getting into a normal "C" debug enviroment,is that right? or
 should i place it into Sdram?(some guy told me,but it has problem,maybe
 my fault) any help would be appreciated !

¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡Qsyang
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡yangqs at 163.com
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡2003-08-26


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/