Hardware Requrements for Linux on 405GPr

Wolfgang Denk wd at denx.de
Fri Aug 15 06:26:33 EST 2003


Dear Steve,

in message <21518-79162 at sneakemail.com> you wrote:
>
> We are in the process of designing a PCI board that will have
> a 405GPr, some SDRAM and a Compact Flash. (Not to mention
> the functionality of our device.) Outside the 405GPr itself,
> are there any minimum device requirements for a Linux that
> can for example run some simple servers?

You need some boot device (flash?); you  need  some  RAM  (>=  16  MB
recommended).

> For example, the matter of whether or not a RTC is required
> came up amongst the designers.

If you don't need a current time of day then no RTC is needed.

Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Ever try. Ever fail. No matter. Try again. Fail again.  Fail  better.
                                                        -- S. Beckett

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/





More information about the Linuxppc-embedded mailing list