booting MGT5100?
Chris Heintzelman
heintz at mail.utexas.edu
Fri Apr 25 01:31:42 EST 2003
Thanks for the info! I'm also using an icecube board. I'll grab the
code from mv when you post it there.
Do you use a bootloader or do you just use dbug to run a zImage?
-Chris H.
>On Wed, Apr 23, 2003 at 09:55:42PM +0000, Chris Heintzelman wrote:
>
>
>>I noticed that a few months ago someone mentioned booting Linux on one
>>of these boards (MGT5100). There didn't seem to be much discussion
>>though; I have one of these boards and would also like to boot linux on
>>it, I'm wondering if anyone can point me to a good starting point on
>>this? Any help is appreciated. I've got a toolchain and kernel built
>>but am having no luck with it.
>>
>>Thanks,
>>Chris H.
>>
>>
>
>I've been working with Kent Borg to bring up linux on the mgt5100.
>As Peter said, they're running it on an icecube, while I have a glacier
>system. The serial driver seems reasonably solid. I've been working
>on an ethernet driver and started testing it today. It has sent and
>received a few packets but lots of cleanup remains. I plan to put up a
>bk repository on source.mvista.com in a couple of weeks. I could send
>you a tarball if you'd rather not wait.
>
>-Dale Farnsworth
>
>
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list