very minor 405GP and 405GPr PCI difference
David Gibson
david at gibson.dropbear.id.au
Mon Sep 30 14:01:43 EST 2002
On Fri, Sep 27, 2002 at 08:27:35AM -0400, Ralph Blach wrote:
>
> Yesterday I discovered a minor 405GP vs 405GPr PCI difference.
> IN the 405GP the ptm1ms bit 31, the enable bit for the region is set to 1
> by the hardware and cannot be written.
> On the 405GPr the bit is writable and this makes necessitates a change in
> walnut.c
>
> In walnut.c there is the line
>
> out_le32((void *) &(pcip->ptm1ms), 0x00000000);
>
> On the walnut, this would work fine because bit 31 cannot be written to a
> 0,
> On the GPr, this disables the regions and PCI no longer functions.
> The line should be changed to
>
> out_le32((void*)&(pcip->ptm1ms),0x000000001);
>
> This will fix the 405GPr and make no difference to the 405GP since the bit
> is permanently to 1.
I would put it more strongly than that: this is a bug, which we just
happen to get away with because of the behaviour of the 405GP.
The arrangement of the code in walnut.c suggests some confusion
between the PLB->PCI and PCI->PLB windows, which is probably the
origin of the bug (the fact that the 405GP numbers the former from 0
and the latter from 1 probably didn't help).
The fix you've suggested should be correct for Walnut, and probably
the other places that that code has been copied. I tend to think,
though, that this configuration of the 4xx PCI bridge should be moved
out of the board code and into ppc4xx_pci.c. If we do that, though we
should fully configure the PTMs, to wit:
out_le32((void *) &(pcip->ptm1ms), 0x00000000);
out_le32((void *) &(pcip->ptm1la), 0x00000000);
out_le32((void *) &(pcip->ptm1ms), 0x80000001);
out_le32((void *) &(pcip->ptm2ms), 0x00000000);
Which should configure the PCI bridge to match the comments in
walnut.c (i.e. map PCI addresses 0x00000000-0x7fffffff to
corresponding PLB addresses).
--
David Gibson | For every complex problem there is a
david at gibson.dropbear.id.au | solution which is simple, neat and
| wrong.
http://www.ozlabs.org/people/dgibson
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
More information about the Linuxppc-embedded
mailing list