Can't disassemble my device driver

[Tom Stefanski]

I have a adatron bdi 2000 connected to my target board and have
successfully load the linux kernel and set breakpoint in schedule
However when I load my device driver, it's text section is a 0xD11D6060
and the kernel is a 0xC00xxxxx. When is disassemble any routine in my
driver, I get all zeros.

 I have MMU xlate set in the config file and I program the mmu correctly
since I can break a schedule. Any help would be apprecciated


 Tom


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/