860 rtc problem

[Marius Groeger]

On Thu, 17 Oct 2002, Tom Rini wrote:

> On Thu, Oct 17, 2002 at 05:18:21PM +0100, Alex Zeffertt wrote:
> > On Thu, 17 Oct 2002, Tom Rini wrote:
> >
> > > On Thu, Oct 17, 2002 at 05:02:23PM +0100, Alex Zeffertt wrote:
> > > > On Thu, 17 Oct 2002, leeyang wrote:
> > > >
> > > > Hi,
> > > >
> > > > I've written a rtc driver for the mpc860.  See attached files.
> > > >
> > > > HOWTO BUILD
> > > >
> > > > 1.	Edit KERNEL_DIR in Makefile
> > > > 2.	make   (builds rtc.o and rtc)
> > >
> > > This appears to be a binary file.  And the easiest way to do this is to
> > > make ppc_md.set_rtc_time / ppc_md.get_rtc_time point to functions which
> > > do what their name implies.  Then enable CONFIG_PPC_RTC
> >
> > You're right.  This is actually what the module I have sent you does!
> > The reason I wrote the module was merely to provide a way for userland
> > programs to set the RTC.
>
> Er, okay.  But why not just modify
> m8xx_setup.c::m8xx_get_rtc_time/m8xx_set_rtc_time to allow for the
> get/set routines there to be overriden ? Doing that would be nice and
> clean, and also allow the 'new' genrtc driver in 2.5 to just work as
> well.

Probably a little late, but: see also drivers/macintosh/rtc.c which is
a perfectly generic rtc driver at a perfectly non-generic location.
Don't mix this up with drivers/char/rtc.c, which is the other way
round. Shudder.

Regards,
Marius

-----------------------------------------------------------------------------
Marius Groeger           SYSGO Real-Time Solutions AG       mgroeger at sysgo.de
Software Engineering     Embedded and Real-Time Software    www.sysgo.de
Voice: +49-6136-9948-0   Am Pfaffenstein 14                 www.osek.de
FAX:   +49-6136-9948-10  55270 Klein-Winternheim, Germany   www.elinos.com


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/