Linux Image

[Steven Blakeslee]

If you are using the serial port on the board then I would assume you have
to use an srec format.

-----Original Message-----
From: Aman [mailto:aman at mistralsoftware.com]
Sent: Monday, August 19, 2002 8:37 PM
To: linuxppc-embedded at lists.linuxppc.org
Subject: Linux Image



Hi All

I have an rom monitor code without ethernet support running on PPC440GP. Is
it possible to download a linux image to the board using the Kermit
protocol. If so what type of linux image has to build for that.

Thanking you in advance
Regards
Aman


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/